• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. johnelway

    Discovered this today.....

    easier way is to back up the subframe. easier than it looks. without removing the bulkhead you can't have access to the bolt. tube frame too close too the bolt. best try is by entering by the steering rod boots hole...
  2. johnelway

    Oil Leak

    best way to ckeck them is by the steering rods boots. Maybe some are missing in the front. have a look on this asap because it's a big problem.
  3. johnelway

    Oil Leak

    i just got the same problem this winter and my friend too. Mine was not leaking but water contaminate my engine oil. Checked the oil pan bolt and 6 bolts was missing in the front. Separate the subframe(not very long, 8 bolts) installed new bolts with some blue lock tite. No problem since 1000...
  4. johnelway

    Factory Yamaha " computer scanning tool " does one

    same symptoms. low idle, need some throttle to idle. after 2500 rpm, no problemo!!!
  5. johnelway

    Factory Yamaha " computer scanning tool " does one

    i chatted with him in private and he says that the ECU was the problem. But it's not my problem. i already tried to swap the ecu!
  6. johnelway

    Factory Yamaha " computer scanning tool " does one

    any update on this? i really need to know what was the solution. i have the same problem!!
  7. johnelway

    nytro ECU swap ??

    thanks. Low quality, hard to read. But i already tried to play with the CO. Do you know if i need to lean it or made it richer?
  8. johnelway

    10 XTX extro installation

    did around 200km this weekend. lot of jump and powder. never heard any contact or touch from the skid. Thanks Guys
  9. johnelway

    10 XTX extro installation

    ok guys, Purchased new cap this morning. trimmed the rail about 3/8 to 1/2. Re done the angled end of the rail. Installed the new cap and redrilled the hole into the rail. drill and tap new hole for the slide. Look like OEM. Now everything seems to be good. will do a longer test ride this...
  10. johnelway

    10 XTX extro installation

    I made a lot of research but never found any photos. My skid is out. I removed the cap but they were pita to removed.
  11. johnelway

    10 XTX extro installation

    Hi Guys, Just installed some doo extros and it seems like me endcap is hitting the driver. I know that i need to trim but Can somebody show me some pics of trimmed caps or rails? I tried to drill the rivet and they seems to be welded in the hole. can't drill them. 2010 are the same? any tips or...
  12. johnelway

    nytro ECU swap ??

    i send them for a ultrasound clean up at the beginning of the season. everything fine, 99% all three
  13. johnelway

    nytro ECU swap ??

    thanks. will do the test this week end!
  14. johnelway

    nytro ECU swap ??

    Hi, I have a little problem of idling since i purchase the sled 4 year ago. I checked everything in the last 4 winter and found nothing. no codes, anything! Trust me, have done lot of test and change. I start to think that the ecu is in problem... Good news, my friend have a nytro exactly the...
  15. johnelway

    nytro code 30 + strange oil thickness

    in fact, it was not only moisture but probably water too. Since the 5th bolts just fall into the pan!! The last run in big powder just gave the final hit!
  16. johnelway

    nytro code 30 + strange oil thickness

    Hello guys, Little Surprise tonight Was looking to install the lost bolt this afternoon and What a surprise i got! Looking at the front section of the engine. Here what i see! missing 4 bolts + the one that i got in the pan. So 5 bolt was missing all on the same side! So i decided to tear off...
  17. johnelway

    nytro code 30 + strange oil thickness

    Ok guys, here the situation... I did flush all the oil and filter replacement. When removing the skidplate, an oil pan bolt fall to the floor!! Checked all the other one and all was little loose! Little bit of oil in the pan too. Retorqued all of them and reinstalled the missing one. Fill with...
  18. johnelway

    nytro code 30 + strange oil thickness

    But coolant is spot on the line in the bottle! I forgot to say that yesterday, i rode in a lot of snow and wind. plus some stuck/roll. After that, it sleep full of snow all around the engine for the night before i can heat it up. Any chance it only got moisture or wate rin it? Anyway, i have a...
  19. johnelway

    nytro code 30 + strange oil thickness

    i heated it up in the garage and now it runs OK. no code. it is possible that condensation cause this? will do a fresh oil change tommorow and see if it redo it again. my coolant level seems OK.


Back
Top