Search results

Anybody have a part number for the bearing retaining ring for the wheels with a 6005 bearing?

Wondering if I have a cracked secondary, or just some casting marks.

2006 Apex - Starts right up, and on a cold start after about 20 - 30 seconds it quits like you hit the kill switch. Gauge cluster remains active. Doesn't seem to be temperature related. It happen and the end of this season in the cold, and does it in my shop at 68 F. It'll start right up...

Can anyone take a pic of the head of the control rod bolt, fiche item track suspension 2, item 69? Or tell me the grade bolt that I need to replace it. My bolt came up missing and is nowhere to be found following suspension work and I need a replacement. Lead time is several weeks out and I'd...

My buddy's '07 overheated last season. After riding for four hours we stopped for a cocktail. When we started up again it overheated and pooped out the coolant within 5 minutes of startup. When we got it trailered back to the cabin we pulled the thermostat and verified it was working. Once...

As finish up getting the sled ready for this season I started troubleshooting an intermittent fuel pump. I found the fuse had corroded to the point of losing one leg, and the relay was covered in corrosion as well. This relay was new in 2020. I've seen an unusual amount of corrosion on carbide...

After and filter change my 08 Apex starts and runs fine but the display is dead. I've checked the connection on the back of the gauge cluster and it seems ok. The headlights work ok too. Any guidance before I pull the nose apart again?

I found a 10m x 1.5 bolt on my shop floor in the vicinity of where I was working in my sled. Any idea if this came off the apex?

Can anybody tell me the size of the track tension adjustment nuts (2008 Apex)? I think they're 11 mm 1.0 thread, but I'm not sure. Don't have the adjuster with me to check hardware.

Is the black cap that's on the front of the suspension rail supposed to be loose/flop around? It is held on by rivet, but it seems strange that it's able to move around.

Anybody had any hands-on experience with the new BRP Oxygen helmet? Looks like it may be a better solution than the Bv2s.

I was looking at my '08 LTX and contemplated adding a fan to the radiator. After looking at the online parts fiche it appears it should already have one. My friend's 07 GT is also fan-less. Was that fan only on some models? I'll have to look for an open connection in that area.

I've put on about 700 miles on my 2008 LTX since buying this fall. Originally I had a Nytro XTX, but decided the Apex would fit my riding style better. After two trips to Mercer, Wisconsin I do believe I've found my sled! We rode around 160 miles a day, and I'm really happy with the ride. I had...

There was a nice lineup of Yamahas at the Great Northern hotel in Mercer, Wi when I was there week before last!

I hit a tree last weekend. Do you think this damage can be repaired, or is replacing the bulkhead in order?

I wanted my seat to be slightly higher, so I performed a minor face lift.... First I removed the staples back to the storage area. I found a pair of fairly pointy diag cutters did the best job. I pulled the cover back out of the way. The foam then easily lifted up and away from the...

Anybody recognize this brand of charger connection?

I've decided to sell my '09 Nytro XTX. I see the Apex XTX has the same 144" dual shock suspension. Am I to assume that the ride will be the same on both? The Nytro doesn't fit my riding style. I'm more of a sit on my butt kind of rider. The stutter bumps killed me last season, and spent most of...