Search results

Rode my buddies 16 xrs rene this weekend with Rmotion. I want this skid in my nytro. It is unreal in the rough stuff. Makes my xtx with star linkage ride like a bronco. Has this been done? Did a search no info

My front skid shock snapped in half today on my 2010 nytro xtx. So i need to replace it. Is it possible to install a shock with a resevoir for compression adjustment? And where would i find one if they do?

Hi was wondering if anyone has the noise reducer installed on their hindle pipe. I am using a turnout and want to make sure it works with it. Does the reducer stick out past the outside of the muffler?

If anyone in the GTA or ontario needs a custom seat done for a Nytro go see jason bowen @ http://www.trimtechinteriors.com/ in oshawa. Custom 2" rise and re-upholster. He did an awesome job. Awesome substitute for a wrp seat for us canadian boys. And the price is VERY reasonable

Did all kinds of reading on this issue, was wondering if there is a long term fix for this. I know lots of people have tried just wondering if we have discovered a good long lasting solution? And if so anyone have pics of the process or instructions?

I was wondering if anyone has tried skis off of 17 Sidewinder on their XTX nytro? Have they revised the Gen 3 from the Gen 1 is there a deeper keel? And has anyone ridden with the New Gen 3 tuner on their nytro?

Hey guys, trying to remove the steering post to change airbox, having troubles getting the linkage arm off the bottom of the steering post. Removed the nut with safety pin and it will not release. Do you need a a special ball joint fork to get it apart? I tried leaving the nut on and hit it with...

Hey gents, i installed a new mtx cable on my nytro, i cant remember where the stock cable was routed. I checked the service manual and did a search but cant find a clear picture on where exactly its routed by the handle bars. Anyone have any pics to help me out?

Noticed today that i have a small groove worn in the primary sheave right at the bottom close to shaft. This normal wear an tear? 14000km on the sled. I hope i dont need to replace the sheaves.

Anyone in ontario have a front spindle for an 09 and up fx nytro? Searched classified no luck need asap

Does this look normal to you guys?looks like a bit of a bend in the wire? Having a tors issue here and there but goes away. Free play is adjusted in spec. Any ideas?

On the weekend i had an upper a arm ball joint loosen up. Now the hole for the bolt is a little egg shaped on top of the spindle. Could i drill it out and use a helicoil? Does the hole need to be the exact diameter of the bolt so theres no play? Or just re install bolt and tighten with red...

Hey guys does this exhaust look familiar? Maybe a schmidt bros?

Does anyone no what spring to use for the primary to lower engagement for smoother take off? I know BOP sells them but looking for something on the canadian side. There a yamaha spring or any other spring that will accomplish the same result? Sent from my LG-H831 using Tapatalk

Installed this kit in my nytro. BPS G2 led conversion designed to work in halogen reflectors. 100watt. And "claimed" 16000 lumen output. The lights are a massive upgrade from stock with stock light cutoff for oncoming traffic. The bulb splits in 2 to utilize factory dust cover with no mods...

Just wanted to share my custom storage and fuel setup for you xtx guys. Bought a pelican storm case for storage ://www.amazon.com/Pelican-Storm-IM2075-Black-Case/dp/B0018NE6GW Mounted it sideways and fastened with self tapping screws through inside. Then for the fuel i went to princess auto and...

Hey wondering if anyone has tried this lighting option. Wondering if it would help focusing the hid light without blinding oncoming traffic. Think it will work on the nytro headlight? Car Rover H4 Projector Lens Mini Lossless HID Bi xenon Hi/Lo Retrofit HID Bulb Built In 6000K With 2 Ballast...

Anyone out there know where i can get an aftermarket bushing kit for the front spindle bushings? I know ulmer has them but trying to find something in canada

Hey gents. Will this hid kit work on my nytro? And can i go with a 55watt or stay with 35 watt? Want to buy before deal expires. Says its AC that what i need? http://www.xenonhids.com/35w-ac-digital-slim-ballast-hid-kit.html

Will this hid kit work for my nytro? Look at this on eBay http://www.ebay.com/itm/301901434159