Search results

2016 apex xtx was checking my wheels during pre season on 2016 apex xtx and found #21 loose on the shaft and both wheel mounts loose. i know they where tight during last year preseason. what i found was that they started moving on #19 shaft and as the shaft is aluminum, they ate the shaft...

went to check my exup adj today like i do every year and it needed setting. ok. pulled up mrsled video on how to adjust and on the 1st cycle, top one broke. bottom one broke 20 min later when i was trying to figure out how to lock down the valve. trying to have my sled rdy to go to ty ride...

sled is 07 rs vector. this was my 2nd attempt at fixing the cold idle issue. sled will not idle on cold start up but idles fine once it is warmed all the way up. stalls out unless on the throttle once it comes off higher idle and choke does not help keep it running at all. as it came to...

well with 36000 km on the 11 apex xtx, the old girl needs the spindle bushings done. noticed the steering arm starting to wear on the housing on the top side. decided to add a shim washer on the bottom to hold it down a bit further. using a 1.25" id s cam washer for a transport. did not use...

apparently yamaha is no longer carrying/making the dupont slides for the delta box chassis sleds. was in at my local dealer today looking for 2 sets to fit apex mtx/xtx and all they are listing now are the slides for the sr chassis sleds. just bought 3 sets on e bay and the guy only had 5...

looking for a hitch bumper to fit my 2011 apex xtx. fits 2011-18 apex xtx or vector xtx. i bent the one i have on it by backing into porch on house unloading from the trailer. fully acknowlege it was a dumbass move on my part. willing to consider oe bumper as i used the one off of the sled...

this a pic that was taken in the digital camera taking over from the old film cameras era. it is from the 2009 ty fun ride and occured around big springs. picture was taken by @Ding. i resemble the towing sled driver.

looking for a set of pistons with rings in 1st or 2nd over for a 1990 et 400 t/r. willing to consider any brand.

just found this on hygear site for those looking for a rear shock for these sleds. 70111-RA Axis - Track Kit, Yamaha, Rear Only, Pro Action, RS Rage, RX Warrior, RX-1, RS Vector $ 1,049.99 USD

in my bi annual cleaning of the oil tank screen, i noticed the hose on my 11 apex with 22000 mi was hard and starting to split at the tank end. the end at the oil pump is still soft and supple. something else to check on the higher milage ones guys.

don't forget to buy your trail passes before nov 1 for the biggest discount. they just got my $ for the year.

looking for the thumb warmer rheostat for an 02-03 sx viper. will take a sx one as well for thumb warmer as they have a resistor that the grip one does not. discontinued at yamaha.

i need a right rear axle for a 2008 artic cat 366 4x4 atv and cat has discontinued them from what i have seen. anybody have a good source for one?

i almost forgot to order my permits for this season. this is the last week for under $200 permits per unit. as i buy a few, helps me save enough for my new sled gear/parts. on order now. now to finish the sleds on my list.

well not too happy with a parts guy. gave me a rear diff kit instead of axle bearings for my big bear. i think it made long enough as it still had oe bearings and the inner races fell out when i pulled the axle. get to go cuss them out tomorrow and hopefully they have the right stuff.

Doing the pre season on my 16 xtx and I found almost all the small idler wheels were loosing the rubber. No studs in track and slides are still good. Bought the sled as a nos in dec 2019. Weird part is the inners where worse than the 2 outer. Good thing I pulled them to repack the bearings this...

as i am a good freind, i am going to be rebuilding a buddies 2011 vk540 that has 120 psi pto and 20 psi mag. sled has less than 3000 km (1500 mi). the tunnel manufacturing date is 04/2010 so the ownership says it is 2011. what i need to know is if this thing has niccacil cyl's on it. as it...

i find this one weird and though i would post it up. brother, @kirkswim , has my old 05 rx war. as my other brother needed his 09 apex mountain clutched, we cheated and took the clutches off of the war and put them onto the apex. apex runs great. clutches from apex mtx where put onto the...

looks like i need a fuel pump ( 83R-24410-01-00) for the 88 vk and all single outlet pumps from yamaha are now discontinued. the nipples on the single rectangle (07-187-01) are too small for the tank line and the pulse line. can i block the extra port on a vk540II/III pump ( 8AT-24410-00-00 or...

well as it is the maintenece time of year and time to look at my 11 apex xtx. it is showing 17000 mi on the clock and been a really good sled maintence wise. anything special i need to look at with that milage out of the normal? in the last 2 years the only major things i have had to do where...