• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Phazer Diagnostic Codes...

Srxspec

Ulmer Racing
TY Advertiser
Tech Advisor
Joined
Apr 17, 2003
Messages
5,329
Location
Menno, SD
Website
www.ulmerracing.com
Country
USA
Snowmobile
2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
LOCATION
Menno, SD
WEBSITE
www.ulmerracing.com
Code 11: Cylinder identification sensor or circuit problem.

Code 12: Crankshaft sensor or circuit problem

Code 13: Intake pressure sensor or circuit problem on Cylinder #1.

Code 25: Intake pressure sensor or circuit problem on Cylinder #2.

Code 14: Intake pressure sensor hose problem. Hose is detached, loose, plugged, pinched, etc on Cylinder #1.

Code 26: Intake pressure sensor hose problem. Hose is detached, loose, plugged, pinched, etc on Cylinder #2.

Code 15: Throttle position sensor or circuit problem.

Code 16: Throttle position sensor is not moving.

Code 21: Coolant temp sensor or circuit problem.

Code 22: Intake temp sensor or circuit problem.

Code 30: Oil pressure sensor or circuit senses low engine oil pressure. ECU turns off main relay and stops engine.

Code 33: Open circuit in the primary circuit of the Cylidner #1 ignition coil.

Code 34: Open circuit in the primary circuit of the Cylinder #2 ignition coil.

Code 42: Speed sensor or circuit problem.

Code 43: ECU unable to monitor system voltage due to an open or short circuit in fuel system circuit.

Code 44: Internal ECU problem with CO setting or adjustment mode.

Code 46: System voltage is too high or too low.

Code 50: ECU internal memory or data problem.

Code 65: Knock sensor or circuit problem.

Code 81: Grip warmer open or short circuit.

Code 83: Thum warmer open or short circuit.

Code 84: TORS system has been activated.

Code 85: Short or open circuit in oil pressure switch.

Code 88: Short or open circuit in reverse indicator switch.
 

My error.It is code 85.Oil Pressure switch.I forgot to hook it up messing with front end.Thank You Mr Ulmer you just saved me alot of time looking around in there!
 
Is there a code 64? For when your Sprocket frezes under the secondary?
ANyone see this one? I did in the I500 when I went to go start it up. Day 2
 
You know I could have swar it was 64 Chad Geaco came over and told me what it ment. I know I had a pinched throttle line from Ice and it threw the code for that. witched matched the one for that. Butt 64 sticks in my head.
 
Nope I looked at the dealer notes today at lunch and they cleared the #64 code for track speed sensor. Why that is not listed ?? Not sure but if anyone has there gear below the the secondary clutch ice up it will throw a code.
 


Back
Top