TURBO34
Newbie
- Joined
- Oct 30, 2009
- Messages
- 8
- Reaction score
- 0
- Points
- 151
can someone help me with the installation of a studder button. I want to use my brake.. I have no ideal what wire I have to use or where it goes. Its on a 09 nytro mtx with powderlites turbo and rb3. thanks
deepbreather
Veteran
power wire from brake switch to positive on relay coil.
negative side of relay coil to ground.
one side of n/o contact of relay to brown wire on rb3 harness
the other side of the n/o contact to ground.
When you pull brake you are now in RPM limiter function.
negative side of relay coil to ground.
one side of n/o contact of relay to brown wire on rb3 harness
the other side of the n/o contact to ground.
When you pull brake you are now in RPM limiter function.