Recent content by 19SRX

Looking for a good spanner wrench for the sidewinders shocks lock collars, the one in the kit isn't the best, anyone knows a good one? I know there is a plier type but not sure about the size. Tx All.

Can't find this info anywhere, anyone knows the capacity of coolant in the cooling system in a 2019 srx sidewinder?

Tx Mototown , few water wetter brands out there? Wich one did you try and how good was it?

Hi everyone, just want to hear some past experiences . Had to do a section of road, was only going 20-40 km/hr. Wasn't looking at my temp gage, then noticed the sled cutting out and the temp light flashing,...lack of snow on heat exchanger, Shut the sled off and removed side panels to let it...

Anyone ever experienced this..just below full tank of gas, had the back of my sled about 2 ft off the ground to install my studs and noticed gas dripping at the front? Could that be normal? Coming out of the tank vent?

I m putting 144 centre only 4/2 woody's gold diggers, to those who don't own an 19 srx try one, you'll be impressed on how this track hooks up on a hard pack trail without studs, wich is what this sled was designed for, yes of course it's better with studs ... I agree, but still wasn't...

What about Ski-Z ice scratchers, anyone used these?

Here's the specs

The 1.075" doesn't exist, that's an error from the suppliers book, they took the part number GDP6-1075 and made a 1.075" measurement with it, the actual measurement of the GDP6-1075 is 1.495" wich has a 1.330" measurement installed, that would finish with a. 330" over track lug, just under...

Awesome...can't beat a cat on screen door. Lol...I ll be using double/ single pattern on centre, you remember the tap size /pitch that you used for those woody's megabytes? I d imagine I d be the same tap for the gold diggers, tx Knapp

Thanks for the info Knapp, I never installed those backers before, but they sure look sweet, so your megabytes are a 5/16" stud ? If so I could do the same ...get a tap for the woody's stud thread pitch.

Anyone ever tried that combination: Woodys Gold Digger Traction Master Studs with Stud Boy Pro Series Super Lite Single Backer Plates? The studs are 5/16" , will they screw in and hold good in the stub boy backers?

Lol.ok thanks, I ll look it up on here

You call that good????

Best is to search snowmobile clubs on Facebook, they will post the latest trail conditions