Recent content by bmwcody

I just replaced donuts on my 2011 Nytro and when I start it up, I have white smoke rolling out from the donut location. Is this normal? I installed the copper donuts so it their a "burn off" period after installation for any coating? I placed a rag over the tailpipe and the engine stalls within...

Can anyone confirm what type of replacement rivets I should use next week when a go to replace the donuts on my 2011 Nytro XTX? I believe a read somewhere part#90267-47195-00, but I've also heard Stainless Steel rivets would work too.

Could I get a pic of the Nytro medium tall windshield with flairs...60? I have a 2013 XTX. 701-741-3985

Has anyone used this windshield bag? Looking for at least a tiny bit of storage and was wondering if this would fit behind my windshield. Thanks. https://www.amazon.com/gp/product/B000Y3AS3M/ref=ox_sc_act_title_1?smid=A2NKVRMZ6BIP01&psc=1

So is it ok to use these skis without the rubber stops or should I order some asap?

That’s what I thought but there are no rubber stops. Has anyone ever seen this?

Last Spring I bought a 2013 Nytro XTX 1.75" and am now just getting around to inspecting the ski carbides. I just purchased 8" inside Bergstom Triple-Points but am unsure if I need to also replace the outside 4" carbides. They seem to be worn more at the front . Also, my Berstrom's came with a...

Hi Rick-- The Nytro is a nice/logical step up from the Phazer. The Nytro has quite a bit more power, better ergonomics and is not nearly as tippy feeling as the Phazer. The only Nytro negatives in my opinion are the small 7.4 gallon gas tank, hard warmers suck unless you get a 2013-2014 and...

Just my son and me on a beautiful trail up on the North Shore near Lutsen, MN, 2 or 3 years ago.

Go with the RSI elements. I foamed the inside of my bars with Great Stuff canned foam then wrapped the handlebars with the following cork liner: http://www.ebay.com/itm/like/112176598819?lpid=82&chn=ps&ul_noapp=true. Then after putting on the RSI elements, wrapped them with RSI gel/grip tape...

If rocking it back and forth doesn't work, try lifting the rear of the sled off the ground. Worked on my '07 Phazer 100% of the time.

Awesome..thanks guys!

Just making final preparations now that snow is starting to fly and noticed this corrosion on the primary rollers. They seem to spin freely but the rust/corrosion is making me a bit nervous. 2011 Nytro XTX...bone stock. Can these be cleaned ( if so, what cleaner) or should they be replaced?

Hello everyone-- Quick question: This past weekend I reset the oil change mileage on my 2011 Apex per the owner's manual and decided to also try and reset this on my 2011 Nytro. I didn't see any mention of how to do this (if possible) in the owner's manual and the function combos that worked...

They look good. Do you think any chance it could be EXUP related? javascript:emoticon(':4STroke:')