Recent content by errol

Me too, interested! How the track is hoding up ? I want to change my Power Claw track this summer and Ice Age rails!

I bought the AC Harness # 1686-668 and made my own wire from the tether to the harness! You can also buy the wire from CATZASS.NET

Thank you NytroXtx17 for your detailed instructions! And you're right you must pull up the small white pc of plastic on both connectors... I was able to install the new AC Magnetic Tether Switch on my SW BTX 2018! I bought the AC harness 1686-668 and made myself the wire from the Tether to the...

There is no plug on my 2018 SW BTX !!! How do I install the Cat Magnetic tether ???

I just bought a ArticCat Magnetic tether (8639-075) for my 2018 SW BTX and it is the closed loop model! But how do I install it because there is no harness under the fuel tank cover ???

Thanks for the report! Might go the same route as you regarding the track! Waiting on a good deal for the M67...

x1000

I have a BTX and carry gas and bag on my tunnel 50% of the time and after 9000 km, have no signs of a bent tunnel!

I would trim to 2.5" just to be on the safe side! Just my $0.02

Really like my 2018 BTX... For the type of riding you describe I'd go BTX with 36" A-Arm... way better off trail!

I get better gas mileage with my TD PowerTrail over stock by about 2 to 3 liter per fill-up! Which translate to about 20 more km per tank!

Very good idea!

Check mine too... no rubbing! But put some duct tape anyway to prevent any future rubbing!

DieselXtx, Did you ever have to roll over the sled with your setup ? Sometimes the best way to get unstuck is to roll the sled...

Hi 04MX, Got the exact same problem as you yesterday riding at -22C Back firing and sled running sluggish at high rpm! Stop the engine for 5 minutes and the code went away and the sled was fine after that! Anybody with more ideas about this problem?