Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.
Just pulled the subframe and everything looks fairly straight except the reinforced rear holes are oblonged again, and sheared the bolts off. It busted both spindles, warped both lower a-arms and the right upper. Left shock shaft is bent. The tunnel on the left is slightly bowed in 1/8” at the...
Someone from Above was definitely watching over me on this one… I am about to tear the front end down, see what else I find. My buddy who was behind me said all he could see was my tail light go sideways and nothing but powder then the headlights shining straight up, once the snow dust settled...
Hit a deer yesterday, doing about 75, I was somehow lucky to walk away unharmed, but the sled didn’t fare as well. It seems the deer some how hit low from left to right and the sled went right, I kept tumbling down the trail and the sled went right and just missed a tree and took a branch off...
You need to take the oil tank loose and let it hang to get at the tensioner bolt. I use a fish scale and hook it at the center point of the belt between the two pulleys. Pull it to 15 pounds and use a ruler to measure how far the belt moves from resting point. The tensioner pulley center bolt...
Please elaborate how it’s slipping off? Too loose? there should be about 1/4” belt deflection with 15 pounds of belt tension applied When the tensioner is tightened properly.
2013 xtx. Need parts. Hit a snow covered manhole, took a chunk out onf the new curve ski dead center of the spindle. Well I made it 5 miles after the subframe reinforcement. Right front lower a-arm is about 3/4” pushed back and top a-arm is pushed forward 1/4” and the spindle is bent inward at...
Hp is irrelevant, looking at boost. We ride around 1100-1300 feet. My rtx is easily boosting over 7 psi on cold days with a 26 tooth lower. I don’t want to risk boosting more than 5 running 91 octane. So the 28 is out. It’s been bouncing off the rev limiter when I punch it seeing 9300+ briefly...
Hope to spot a MPI 180 kit pulley, 26 tooth. I have found the steel alternative that gates makes, wondering if I can just use one of them instead.
https://www.biedlers-belts.com/catalog/product/view/id/233427/s/gates-p26-8mgt-20-sprocket/category/5437/
I am not really wanting to go 129. Just installed a HD driveshaft with extroverts for a 2.52 pitch track. I am thinking it’s ok as is for ride, but a lighter skid that rides even better would be nice. Finding a nice R-motion out of a 1200 Rev is the hard part
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.