• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Recent content by RJH

  1. RJH

    Ceramic bearings to reduce drag?

    Definitely a better bearing..as far as stickshin...but so slight you would not feel any improvement. Running a high speed champ sled..with 100 other things done..is where they would be good.
  2. RJH

    Aftermarket clutch weight testing from this weekend

    I have the up most respect for the guys at Thunder products..come up with some pretty good ideas...even my SRVIPER needs better spring...but your words confuse me..same twist pressure...but more side pressure.....so if you scale the clutch...and had say 15#'s. on the spring.....it would stay the...
  3. RJH

    Machine the primary

    Once a drive goes past 1:1 you have lost efficiency.....better to use gearing and let the clutch do what it is supposed top do..in my opinion. Its good what he did..for other reasons
  4. RJH

    A little advice needed.

    I drove my friends Apex last winter..couldn't get back on my Viper fast enough..I am 6'1" still
  5. RJH

    Float 3 vs Elka vs?

    Might be OK for mild trail riding....there is a reason 95% of all snow-cross races in all classes use FOX..
  6. RJH

    2016 sr viper stx dx engine oil leak

    I'll suggest that to the dealer...sounds like a possibility... How does the oil get into the air box..... Dealer did say because I had it tilted on its right side (rough terrain) when I brought it in first time...but I have not tilted it since...
  7. RJH

    Gearing?

    Like some sno-x race sleds..are in a U channel and can move...up front I thought mine was bolted..I'll look..
  8. RJH

    Track/slide drag

    On a trail Yamaha you may eat the slides with the wheels off..for the the wave reason you mentioned.. that happened to my Phazer...
  9. RJH

    Gearing?

    I still need help on what you mean..? Just figured out how to do the WOT......when I pull it out to wash with the tractor..going to strap to the bucket hook..lift it....that should be safe...I'll try and vid the KPH too bad it didn't display like the RPM Need to get to the dealer as...
  10. RJH

    Track/slide drag

    I took the skid wheels off my 250 ET and it went faster than my 300. I took the wheels off my 99 Phazer it was way smoother and faster..but ate the slides.. You put wheels on a ski doo sno x race sled and it kills all performance... I only leave mine on the STX so it saves the slides For...
  11. RJH

    Gearing?

    What do you mean by that? When we get to the skid.....I will drive over a rolling mogel and the front skid won't compress into the chassis..
  12. RJH

    2016 sr viper stx dx engine oil leak

    So..went 230 k last Thur....more oil leaking next day..then it stops..back to dealer i guess.
  13. RJH

    Gearing?

    I started that that back in my race days...you see...circle m injectors didn't work long. Oh they work fine....but they lost optimum performance from time to time. The fix was new..maybe 6 sets a season. Just before staging I'd pin it and it had to bounce off 8750 then over rev. This all...
  14. RJH

    Gearing?

    Went riding Thur but no place to open up...I'm justgoing to put it on a stand a pin it to see what the gearing will go to..and go from there
  15. RJH

    2016 sr viper stx dx engine oil leak

    Whenever I see a good bank on an outside turn I am up it...other than that no Going for last ride of the season tomorrow..Halliburton Forest...so I'll take good look after that. I smell of "engine" after a ride my wife says... It is leaking same floor location as when dealer said it was air...


Back
Top