• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Recent content by SnowBandit

  1. SnowBandit

    Bearing Behind Secondary

    That is what I thought, but wanted to check before I started pulling things apart.
  2. SnowBandit

    Possible new muffler option.

    Do you have a sound file so we can hear it?
  3. SnowBandit

    Bearing Behind Secondary

    I have been greasing the bearing behind the secondary every year but now it has close to 9,000 miles so i was thinking of replacing it. Do you just remove the two bolts from the holder and pull the holder and bearing out? Or do I have to take the whole chain case apart?
  4. SnowBandit

    stock nytro xtx in cooke city? is it gonna work?

    I rode my 09 xtx in West Yellowstone and on Togwotee a couple weeks back. Now I didn't do any huge hill climbs but played a little in the deeper stuff and I did ok. I have stock skis which didn't help but the key was keeping the track speed up and the sled moving forward. The mountain skis...
  5. SnowBandit

    Clutching for higher elevation

    09 xtx. Last time I was out I stuck to all trails and plan on the same. My dad is in his 60s who will be riding with me so not going to play off trail.
  6. SnowBandit

    Clutching for higher elevation

    Will be heading out to west Yellowstone this winter. I am looking at what needs to be done to the clutches to work at the higher elevation compared to the east coast. Anyone have an experience with doing this? I will be sticking to all trails out west if that makes a difference.
  7. SnowBandit

    Question - Greasing Drive and Jack shaft bearing

    Yes just center bolt and the clutch slides right off keep the washer/ spacers in order.
  8. SnowBandit

    Balljoint popped out now race stuck in the A-Arm

    Yup removed the clip. Going to try a few things tonight
  9. SnowBandit

    Balljoint popped out now race stuck in the A-Arm

    So I was trying to remove the balljoint from the lower a-arm and couldn't get it out. Well tonight the ball popped out of the race and the race is still stuck in the a-arm. Anyone have this happen and how did you remove the race? Looks like there is a tiny bit of lip was going to try and use a...
  10. SnowBandit

    Ball joint replacement

    Wish I had a rig welder. I have a ball joint press I am going to try and also going to get a grade 8 bolt. Just hope the ball doesn't pop out of socket
  11. SnowBandit

    Ball joint replacement

    Mine I think are rusted in. I am replacing them with the new style you show below.
  12. SnowBandit

    Ball joint replacement

    Trying to get the ball joint out of the lower a-arm. Took the clip out and ran a bolt thought the joint and a large socket on the bottom broke three bolts so far trying to get the ball joint out. Did this on the other side and it worked although the ball came out part way through removing and I...
  13. SnowBandit

    Phazer Riders Check Spindle Ovaling Where Ski Mounts

    Anyone know if these are available anymore tried to email but it was bounced
  14. SnowBandit

    Belt deflection

    Like said above check the chain tension. There is always some whine on the Yamaha 4 strokes atleast all of mine do and I have over 30,000 on 4 strokes and few friends with them same thing have chain case whine not super loud but you can hear it. As for track spinning on the stand mine spins...
  15. SnowBandit

    2009 Yamaha Nytro chaincase

    I should be ripping mine apart this weekend and should be able to take pics. Just need to remember lol


Back
Top