Recent content by VMX

my buddy made 2 sets last year cost 10 dollars 1/2'' cable crimp on eyelets and an old carbide stud

when you put the reverse gear in there is a metal plate and spring with a long bolt that loads the gear make sure you blue locktite that bolt in or it will loosen and eat through the outer cover

there was no sign of any impact underneath they said it was coming out at the gasket

Yes there is a plate on the bottom of the motor it actually the sump

They tried to tell me it was oil that was leaked down but it happened while it was running and about a quart of oil on my garage floor after they got it back in the shop and looked at it some more they found it was leaking from the lower pan on the engine at the gasket I had never heard of it...

I just bought a 2011 apex se used from a local dealer and after getting it home and running it some it developed an oil leak they took it to the shop and found it was leaking from the bottom engine cover gasket has anyone else ever heard of this before

12 xtx

I have a sc10 3 in my Apex RTX fairly easy if you can fabricate

Ok you xtx guys I have a gt and have a chance to get a xtx for a good price how does the ride compare I had an rtx with the ck suspension and I hated it put in a ski doo sc10

when installing pilot skis on an Apex do I have to reverse the center bushings on the skis I can't remember

had this problem on my 07 rtx stalling when coming to a stop low idle speed turns out the exhaust cam had skipped a tooth reset cam timing and its all better 22000 miles and still runs perfect

thinking about buying one how are they ? ive test riden one but dont know anyone who owns one that i can ride or get more info from are they reliable or do they have problems

check cam timing

sometimes these motors will skip a cam tooth happened on mine exhaust cam off 1 tooth stalled after coming to stop while ridding