• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Recent content by WildBill67

  1. W

    Stud boy deuces and SC10-III skid help

    Is that pattern for 144 studs?
  2. W

    Stud boy deuces and SC10-III skid help

    I have a 2007 Apex and the guy I bought it from installed an SC10-III skid. I just replaced the ski carbides with 6" stud boy deuces and now I want to install Mack Studs in the track...does anyone have any suggestions for how many studs and is there a specific pattern you recommend?
  3. W

    07 Apex clutch sounds real bad!!!

    It came back out! After about 100 miles the split collar came out again. Any ideas what might be causing this or how to keep it from backing out?
  4. W

    Illuminate handlebar controls

    Any good ideas on how to illuminate the handlebar controls so they are easily visible while driving at night?
  5. W

    07 Apex clutch sounds real bad!!!

    UPDATE: i found the problem...there is a collar on the back side of the secondary clutch that somehow came out? After putting it back in the noise is gone. Hopefully it will stay in there. But we need more snow to find out lol. Thanks for all the suggestions.
  6. W

    07 Apex clutch sounds real bad!!!

    I did try a new belt and it does the same. Any idea what kind of money i'm looking at to get them rebuilt? Yes def some jury rigging went on!
  7. W

    07 Apex clutch sounds real bad!!!

    Hi guys...i'm looking for some help! I bought a used 2007 Apex with 22,000 miles on it. The prev owner put a ski doo track and suspension in it (i think its an M-10). I didn't ride it much when I got it due to lack of snow and when I did i noticed a vibration and occasionally a clunking noise as...
  8. W

    Antifreeze leak

    I too have a leak and it looks like it might be coming from the bottom of the water pump? Im thinking that pulling the motor to replace the water pump is not the task im up for. Has anyone had luck using the antifreeze leak stop stuff and if so what kind?
  9. W

    Drive shaft bolt through case

    Good point with the metal shavings. I will order a bearing and seal kit and clean everything else with brake cleaner. I will also get a new bolt, Loctite it and torque it. Thx
  10. W

    Drive shaft bolt through case

    New to the forum...looks like a lot of great info! I have the same problem and have a couple questions... 1) While I have it all apart should I replace bearings and seals? 2) Is there a torque requirement for that bolt? 3) Will epoxy such as JB Weld do the job sealing up the hole in the cover...


Back
Top