Recent content by woodysattak

I know with the pb-80 the 37 finish gained 1 to 1 .5 mph in a 1000 ft compared to 35 finish. But this was with the pb-80 not the yammie primary.

No its perfectly fine. I agree with you about the turbo slug weight farther out will indeed pinch the belt more. Also I have about 14 dalton helixes that I bought for testing. And with the pb-80 the higher initial start of helix the less it slipped in the primary. I tried a 33/35 helix with...

Well I have been testing the pb-80 for a year now have about a thousand miles on it and I love it. Did some testing against the yamaha primary and the pb-80 was faster. Yamaha primary setup. XS 825 Belt HH weights 39/33 Helix Orange primary spring Orange secondary spring set at 3/1 Pulled...

I did not notice quite that much but after a couple back to back runs it dropped about maybe 100.

So far so good. Got it dialed pretty much in and it runs strong. Tewco Industry in Franklin Wisconsin is a dealer for cvtech. I am pretty sure he has them in stock. Pm me if need more info.

Anybody with a turbo dynamics gps guage can you explain where to splice the wires into. The directions are a little hard to understand . Thanks for any help.

All I can say is Mike and Dan are correct. Took minr in for a little warranty work and figured I would have them do the first oil change. They put in 0-40 synthetic. Well went home and took out following weekend and noticed it didn't seem to pull the same rpms and just seemed slower. At first...

There are no rubber pucks. They're made of some type of composite plastic material. I don't think they where out very fast. Had them on my 1200 Doo and had over 3000 miles and we're still fine.

Dan you should be able to to get everything through Wowchad on this site. He is dealer for cvtech in WI. He should be able to to ship what you need in the US

Well we are leaving for a cruise on saturday and the snow will be gone upon return. So I ran a couple runs. The back field had excellent hardpack for about 800-900 ft run. Running upnorth this past weekend it seemed like it liked to pull 8850-8900 on top to get mph. The 43/33 pulled about 8800...

Mike that is correct at idle you can hear a bit of noise but as soon as the r's go up it is quiet.

Just got back from a little trip to northern WI. I didnt put alot of miles on about 180. Ran the pb-80 for the entire time. It worked great. Ran it with a 43/33 dalton black/orange wrapped at 6/1. In front ran 500/1300 with 106 grams of weight. With this helix it wasn't quite as snappy as the...

I bought it in the US for a little under 40.00

Its a puller that is made for the pb-80 on the winder. The doo puller is close to it but is a little. different. You can order through cvtech in canada.

Well was supposed to head up to northern WI this weekend but a winter storm coming would be no good riding. Down in southern WI are trails were still open tonight for the last day. Perfect conditions very hard. I am still testing on the PB-80. We went out to supper and put on 40 miles. The more...