• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. M

    Quick Disconnect Battery

    Oh I see, i can completely understand why you'd want to do that. Glad you figured it out.
  2. M

    I made spacers for my rollerski (C&A MTX Ski)

    Just though I'd post my solution to being able to install my rollerski's to my setup. I got myself a set of 8" C&A MTX ski's and couldn't attach my rollerski's without making a spacer. I ended up buying a block of 1-1/2 thick solid plastic and used my jigsaw and angle grinder to shape my...
  3. M

    Quick Disconnect Battery

    Shut it off from what? The only way it would drain quickly would be if you have hooked something up that's always powered on. The best thing to do is pull the right cover off and hook up a tender to the charge ports.
  4. M

    17V reading at passenger hand warmer connector

    I was able to make it up to the cottage this weekend and I'm back with results, I feel like a dummy. I tested the voltage at the battery while idling and received a reading of 14.3. I was getting the same reading at the fuse and the connector for the hand warmers this time around. So what...
  5. M

    17V reading at passenger hand warmer connector

    Thanks Mooseman, I really appreciate the schematics. It's interesting how they wired these in.. My only concern with testing directly at the battery is that I would have to run it without the airbox, I imagine it should be fine since it's a short period of time and the temperature sensor is...
  6. M

    17V reading at passenger hand warmer connector

    Hi Mooseman, I imagine that I can check at the charge ports coming out the right side? or should I check directly on the battery ports? I believe that the rear warmers are controlled by the ECU which then goes through the relay. I can't seem to find any schematics for this sled anywhere...
  7. M

    17V reading at passenger hand warmer connector

    Hello everyone, As the typical Venture owner, my passenger hand warmers weren't working over the last two seasons that I've owned the sled. I found the issue being at the switch so I ordered a new one. I tested the connector before connecting the switch to see if power was getting to the unit...
  8. M

    New Used RS Venture Help

    The clutch rattle is normal for the stock clutch. I got so annoyed with mine that I bought a CVTech powerblock80 which has zero chatter.
  9. M

    I need to be schooled on passenger handwarmer wiring

    I tested the connection going to the switch over the weekend and I was getting 17V at idle which is very strange. What would cause this?
  10. M

    I need to be schooled on passenger handwarmer wiring

    I'll check it out and most likely order from him. Lol fair enough! I can't wait to have mine working again.
  11. M

    I need to be schooled on passenger handwarmer wiring

    Hi maim, I'm aware of how the system works by researching for the last week lol. I believe the fix from rock is a replacement relay if i'm not mistaken and ignores the needed RPM range for the system to operate? That's ok with me as I always turn it off if I do not have a passenger with me...
  12. M

    I need to be schooled on passenger handwarmer wiring

    Hello, As i'm reaching to tail end of putting my Venture GT back together, I decided to tackle my passenger hand warmers that haven't worked since owning the sled. First I thought that the handwarmers themselves weren't working so I tried peeling back the rubbber boot off of them, i tried...
  13. M

    Rollerski for 8" C&A Pro MTX Ski

    Hello everyone, I went to install my old Rollerski onto my new skis and they cannot retract due to my wider ski. I hadn't thought of that when ordering my skis and now hoping I can figure something out. I wrote to Qualipieces since they have a rollerski for the Arctic Cat Bear Cat 8 inch ski...
  14. M

    On the quest for better steering/handling - RS Venture

    I was finally able to put on my new skis and carbides over the weekend and have the sled off the jack stands. I decided to go with C&A Pro MTX skis which are 8" wide and went with the aggressive snow trackers.
  15. M

    On the quest for better steering/handling - RS Venture

    With all the steering components done I was finally able to button up some of the front end over this past weekend. I painted my new bottom A-arms as well as the Apex upper A-arms that I bought. I decided to use Dupli-color Metalcast paint and therefor needed to lay a base of chrome paint. The...
  16. M

    A Arm Paint

    Oh ok, I would have thought that Yamaha would have used the same paint code. I did a comparison of my painted arm with one of the panels off my sled and it is quite close.
  17. M

    A Arm Paint

    Here are the results from the Dupli-Color Metalcast. You need to lay a base of Dupli-Color Chrome or Metalcast Base before adding the color. I could only find the Chrome paint so I put a couple coats of that and then did 1 light coat of the red and 2 medium coats, my plan was to do 2 light...
  18. M

    A Arm Paint

    I'm pretty sure the paint code is 0918 - Deep red metallic but it would probably be pricey to have that made. Canadian tire has Dupli-color Metalcast spray paint in deep red which looks like it would be a close match. I'm hoping to paint my lower and upper A-arms over the weekend with that paint.
  19. M

    On the quest for better steering/handling - RS Venture

    Thank you, I cannot wait to try it out this winter and see the difference. I don't do much aggressive riding but i do use a lot self made trails in the forest to get to random lakes and fishing spots. There's often a lot of ruts or hidden stumps I run over. I plan on finally doing some real...
  20. M

    On the quest for better steering/handling - RS Venture

    I was finally able to assemble the remaining of the steering components over the weekend. I ended up replacing all tie rod joints with ATV ones, the ones I got are for Yamaha Banshee, Warrior or Raptor. Since they are bigger and longer, I had to shorten rod #24 and I have created my own #29 with...


Back
Top