Search results

It depends on which graphics you're referring to. For example, if wanting to use the Apex shroud graphics on your Vector then yes, both the Vector and Apex use the same shroud part number8FP-77111-00-XX with the last two digits indicating paint color. But the other side panels between the two...

That was the point I was trying to make in the other post. That all prior versions of pre-studded tracks were single ply but if you wanted a taller lug without a long stud, one ply was your only option. With this one, although you get 2 ply, you don't gain much in lug height. Even with having...

There's another post discussing this track as well

I have had great success with Steve (@cannondale27) in revalving my shocks. Although they were not IQS, he did service my Y.R.R.S shocks. As for the IQS, here is a nice post where he comments on the 1-2-3 settings and what can be done. Worth a read. I also had Hygear service the Ohlins on my...

I too use Napa filters but opt for the Napa Gold which are essentially Wix filters. I know the oil filter numbers for the Nytro-1049cc (1365) and Apex (1358) but not sure of the Vector so hopefully others will chime in.

Yes, even the crank case in the linked Partzilla vid had the same '5' single digit number where he too stated that it meant all journal locations were the same at 5.

It doesn't take much like the Mono suspension to be an improvement over the NoAction ProAction that came with the RX-1. I ended up putting an AD Boivin Expert-X skid in my RX-1 and then extended it to a 136". I have the Mono in the my 08 but it has Ohlins all around and have been happy with it...

Higher pitch? Yes, but higher than the Ice Storm which is what I was comparing it too, then no. Although the Ice Cobra 1.6 does come in a 2.52 pitch, it is also offered in 2.86 so again same as this one.

Just an FYI, but you can find the steps on how to change the oil via Yamaha's Owners Manual link I'd still consider becoming a VIP to help support the site and yes, one of the perks is having access to the service manual. ;)!

I'm having success with the Ice Storm 1.5" and like biff, the added lug height really made a difference over the 1.25" Ripsaw II was previously running. However, that's on an Apex and not a Sidewinder. If you want to run a taller lug and have studs on a Sidewinder, you are either looking at...

Mooseman, is this the stuff you're talking about; can on the right? I've always used the stuff on the left but the reviews on this DeoxIT are pretty good:

Generally, you can visually see if they are bad/are shorting out but as long as they are clean and look good, then the ground blocks may not be your issue:

With you not being a VIP, you can only advertise in the free 7-day classified section but even if VIP, there is a special section in the forum to post those forsale ads vs posting in a thread discussing 2025 model. Hope this helps. ;)! Sweet rides, btw.

Knowing the ease with replacing the starter on an Apex vs. say a Nytro or other similar model where engine movement is required for cleareance to remove the starter, many, myself included, have opted for an aftermarket starter like you went with vs OEM. I went with one that Travis of Barn of...

See posts #23 (asking him this question), #24 (him answering), & #25 (you quoting his reply).:dunno:

By 'oil leak', are you referring to an actual oil leak where you have a pool of oil either on the floor or within the sled or do you mean a leak in the sense that it is being burnt and you can smell the residue? Reason being is that you mention the area under the handle bars which is exactly...

Ya know, when we were able to go for a short ride on Saturday of the TY ride where Cameron and I drove out to Kingston Plaines, I do recall him mentioning someting about it being hammer time but thought it was just him being anxious to ride so it's quite possible. :rofl: