Search results

Running Pilot 6.9 with skidoo 8” carbide down the middle and nothing else. No shims etc. Was getting a lot of darting last weekend on hardpacked trails. Should I be shimming the skis ?

I would be very interested.

Cool project

OK, Thx Shagman.

Step 1) Take out the primary roller pins and grind 30 thou of them and reinstall. The bolts will now tighten against the casting and stop rattling. Not to much as you don't want to stress the casting. Then get very thin washers (need to dig up the Yamaha part number) and install them on the...

Ok, on the machine I am about 1 mm above.

Checked my alignment between secondary and primary and I was at the outer limit 61.1 mm. Spec is 58.1 mm to 61.1 mm. Removed the 1 mm shim from behind the secondary and I am now at 60 mm. This also brought up by belt height to the bottom of the cog being 1 mm above the sheath (secondary off...

Is that .5mm below to 1.5 mm above at the bottom of the cog or the top of the cog (top of belt)

The Black looks bad-#*$&@!

How much was it?

Nice, what have you done to it so far? Yeah, its done here until we get more snow.

Best top speed so far on speed has been 116 mph ideal conditions. lakercr, what are you getting?

Yes

Mine is getting beat up, marks on the shaft and one of my tabs is slightly bent .

I have heard loose turbo bolts will throw this code.

You know at first I was disappointed with the handling of my stock SW LTX-LE when I first rode it. After some minor suspension tweaks and adding Pilot 6.9 ski's it is fantastic now. Easy and predictable steering. I'm not studded and it hooks up really well with blocks out and absolutely rails in...

400km this last weekend on the Pilot 6.9 still loving them but did find a weakness. Riding in low snow conditions if you wack a rock or stump with the outboard edge they bend up easily. Just due to the width and lack of reinforcement (it is a mountain ski so not exposed to that type of...

4sure, I'm actually in town this week for a change. Cooked my sliders yesterday so need to slap on some dupont ones.

Hey Jim, was riding with Tony P. yesterday and his tuned up SW and my bone stocker. I had my blocks out and his were still in. We swapped sleds and couldn't believe how harded mine transferred with the blocks out. Such a small amount but makes a big difference.