Search results

The 03 RX-1 Mnt has given me around 10000 trouble free KM total on the sled around 15000 KM. I moved from some of the nicest groomed trails in Northern Ontario (Kapuskasing) to a no trail system area Thunder Bay. All the riding that we are doing around here is off trail, boon docking, ditch...

After reading Phazernut's post I thought I would reuse his title. I'm swithcing brands also. The 03 RX-1 Mnt has given me around 10000 trouble free KM total on the sled around 15000 KM. I moved from some of the nicest groomed trails in Northern Ontario (Kapuskasing) to a no trail system area...

I broke the lower shock absorber axle #31 on the diagram. I also bent the two bolts attached this axle #8 on the diagram. I also need to order the shock bushing. I didn't hit anything hard. I was going to send the shock a way this summer for a re-valve but I didn't expect the shaft to break...

Last year I was running the following and pulling around 10600. I know this was a little high but it was working for me. 8bu-10 /13.9 steel 14.5 rollers O-P-O 30X3.25 White 70 on secondary. 0-1000 elevation 50/50 trail/off trail, we don't have any real hills around here This...

Well after reading about the under tunnel exhaust for a couple of years I decided to take the plunge after burning a hole in my pack that I had strapped to the back of the seat (it slipped down and the exhaust melted a nice hole). I read rockmeister post and used this as my starting point...

Doing some preseason maintenance on the 03 and found the exhaust donuts completely gone. I'm in the process of doing an under-tunnel exhaust and found the pipes coming from the engine to be a little loose. I also discovered my exhaust pipe broken in half right at the y-pipe. I was going to cut...

I've read all the threads I could find on this subject. I don't remember having so much snow in by engine area last year :o| . Taped and weather stripped every hole I could find. The only thing I could possibly see is snow is coming in where the hood and body panel meet near the shock mounts...

After searching for a stock tow bracket and coming up with nothing worth while for the RX-1 Mnt. I decided to have one custom made. I had a local machine shop put it together, made out of stainless steel. Since the photo I drilled a hole in the bracket to mount the safety strap to instead of...

Picked this up during the summer and took it out for a test ride without the family today. Made by Fibro tech out of Quebec they don't make them anymore. One of my friends has this same model and it handles the trail really nice. My other friend has a single bench seat model with only two ski's.

I was thinking of doing a setback with my 151 ZX-2 skid on my 03 mnt. Thinking of going to a 159 (staying with a 2.52 pitch) or a 162 and changing the drivers to 3.0 pitch. Could I do this safely without adding extensions to the skid? If I went with a 16" wide track is it just the front...

I'm running 05 clutching in my sled RX-1 Mnt 8bu-10 /13.9 both holes steel 14.5 rollers O-P-O 30X3.25 White 70 on secondary. 0-1000 elevation When I'm coming to a stop my belt chirps a little. I did a search and found out I should clean my clutches and use green scotch pad to scuff...

I'm looking at getting a new track currently running 151 1.25 inch predator 2.52 pitch. Looking at new Crossover 1.5 inch, Challenger 2 inch, Finger 2 inch all Camoplast. Anyone use any of these tracks. I ride 50/50 trail off trail. I would like to stay with 2.52 pitch as I have a slightly used...

Thinking about trying this track it's an 1.5 inch lug track. I wanted to find a 1.75 inch lug 151 track but can only find 2 and up or the 1.5 crossover. I ride 50/50 trails/off trail. I'm currently using a Camoplast Predator 1.25 inch track works well on trail but not enough traction in the...

I'm running 05 clutching in my sled 8bu-10 /10.3 steel 14.5 rollers O-P-O 30X3.25 White 70 on secondary. 0-1000 elevation 50/50 trail/off trail, we don't have any real hills around here. I noticed this year I'm pulling 11000 to 11100 RPM at WOT. It holds there and drops down to...

Two years ago I decided I wanted to buy a 4-stroke Yammi and came across this forum. I knew I wanted a long track sled and bought a stock 03 RX-1 Mnt 2 years ago. Here's a couple of pic from the earlier days. First Mods were 3 inchs of foam added to stock seat, MPI dropdown brackets, 05...

I finally received a 151 ZX-2 for my 03 RX-1 Mnt. I noticed that the longest skid install to date posted is the 136. I'll start tomorow and post pics when completed. After reading about all the retorq issues I think I check the bolts that I didn't install for proper torq specs. Ditchbanger...

Does anyone know of a tool that helps with changing the belt on a RX-1 mnt. I have a heck :o| of a time pushing the secondary sheaves then twisting it to open the secondary enough. If there isn't a tool any one have any tips on changing the belt.

A bunch of my friends went out to Cooke City Montana last year on a sled trip and had a blast. They booked another trip and I'm jumping on board for this year the trip isn't until Feb 2008 but want to start looking into things. Will I have to change anything on my sled (e.g. clutching...

Here's some pics of my Wildchild steering relocation kit installed $195CAN plus $22CAN shipping. To bad it's spring here now and I'll have to wait until next year to try it out. Still need to finish up some of the cosmetics but the bulk of the work is done. The wire hanging in the 3rd picture...

I orginally posted this in the RX/RS Mnt section and got one response from a member but I had 71 views. I thought if I posted it in here I might get a couple of more responses. I've done a couple of searches and for the most part everyone that has a Holz skid under their RX-1MNT has said...