Search results

http://vimeo.com/39035326

Short vid of my buddies and I (Nytro) up here in the PacNW on a particularly fine powder day at the end of February. Enjoy! http://www.youtube.com/v/y8OBlAYhGJA

Little PacNW powder action from opening weekend: http://vimeo.com/32585082 Enjoy!

Couple pics from Yesterdays ride out here in WA, it ain't over yet, in fact for the next few days it's Over the hood!

I installed a Timbersled suspension earlier this winter and at the same time put on a new Challenger Ex 153" on my 08 Nytro MTX. I used the stock rails and idlers. Problem is it's super tight. I have the rear wheels all the way adjusted back and I sucked the limiters up to give myself a...

I finished up my Better Boards install last night, even though it's been posted before, it sure helped me to see everyones pics and install threads so I'd thought I'd share mine as well. One of my biggest gripes about my sled is the crappy boards. Mine pack with heavy PNW snow and I spend all...

Looking to replace my stock torsion springs with the heavier set from an Apex. Can anyone who's done this confirm I got the right part numbers? This number seems to be the same on 2008+ so I assume the year doesn't matter, correct? 8FK-47473-10-00 SPRING, REAR 1 (K=2100NMM/DEG)...

I just ordered up a new Challenger (9785) to replace my damn POS Maverick. Notably it's a 2 Pace (every second window clipped) and just wondering if I should have any concerns on not running a fully clipped track. This is my first ever track swap so I'm not to familiar with advantages of...

Anyone using JVC Snow Eliminator boards on their Nytro? I can't endure another season of kicking the crap out of my stock boards. Rather not buy another pair of boots. :o| Saw the JVS on the West Coast Sleds site and they are relatively cheap compared to some other boards, wondered what...

Anyone replaced the stock front bumper on their Nytro? My buddy turned his tree magnent up to stun on last weekends ride, and mangled the front bumper on his 09 MTX pretty good. Only 130 miles on it. Yikes. Any suggestions on a good aftermarket replacement are welcome, especially if...

My buddy Oneshot took my favorite sled pic thus far of the season on Sunday. Thought I'd share. If only you could see the smile on my face:

Just realized I got a nice 3-4" or so hole worn through the front left side of my hyfax. Right side is almost through as well. Bumming. I only got a little over 1000 miles on my Nytro. Wear seems a little premature to me. We still got about two months left in our season up here in the...

I'm basically electronically dumb, so I'm looking for a little insight from the Electronics Gurus out there. I put a Gunnar Tether on my 08 Nytro MTX and recently it got stuck permantely on. Then later the next ride, ECU got angry blew up a error code 81 (handwarmer short) then my sled...

Anyone running a 18 Tooth Drive sprocket on a stock MTX? I just ordered one up and I'm hoping it's going to give me a better bottom end for boondocking/mtn riding. I rarely ride anything open and flat, thus top end just doesn't seem so necessary for me. Any suggestions? Complaints? Concerns...

Anyone done a Superq Install on a 2007 Phazer Mtn Lite? I told my buddy I'd help him out with it, just wondering if anyone has done it. I have a Nytro and mine was super easy, just pull the seat, remove three bolts, bracket, replace the gasket and re-assemble. Is the Phazer just as easy...

Reposting this for those of you that don't visit that 'other' forum. I did a install of a AAEN Performance on my 08 Nytro MTX last weekend, shot some vid and did a quick edit. In the end I do some side by side comparison of stock sound -vs- AAEN. Whole install took me about 45 minutes. I left...

Any tips on removing the stock drop bracket? I have to replace the back section of my tunnel and I figure it's as simple as rolling it on the side, unbolting and rebolting the new tunnel section. But, I given the suspension components anything I should do before taking the bolts out?

Hey everyone, my first post here. I did a little, ahem, rear tunnel damage last week, and in the process of my repair I'm thinking of ditching the stock light and relocating. My idea was to use a FourBarr LED right on the back part of the tunnel. What I was wondering was has anyone routed the...