Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.
definitely not exhaust gaskets, seen them do funny things to running condition but not this. Think I solved the issue. Sled came in pieces and complained of code 12. so i changed the pickup coil and it fired right up put everything back together and found this issue later on once the sled got...
Hey, any updates on your problems?? Have exact same issue with a 2008 Vector GT, although i believe the choke doesnt really have any help in re-starting. Full throttle it wants to loose all power and sometimes u can feather the throttle to keep it running, other times it will die and then you...
I agree the clutching is pretty great stock on these units, but I swapped out the old helix and installed a roller clutch kit from Thunder Products. It is a little bit of work to install, and I did a few mods to it to make it work for me, but it totally changed the sled, smoother and harder...
Ulmer has oilite, like a brass bushing kit, but they are out of stock until feb. 1st, and i have a big trip planned for the third and would like to change them beofre then. The Yamaha ones don't last very long. Should have ordered them a while ago :o|
Ulmer is out of stock of his front end bushing kits for Apex's and I need to replace mine soon before I go on a big trip. Is there anywhere else I can get a similar oilite kit.
The 06's had a idler wheel update and could still likely be changed under warranty. As for everything else they are only covered under the first year of ownership.
No common problems with the GT. There was an update for the 06's to re-position the wires underneath so they didn't pull out of the shock. I have seen the wires pulll apart before from extreme ice build up, and this will show up if your thumb control doesnt work and there are no bars on your...
Thats all you have to do, find a small flat screw driver that will fit in the square hole diagonally and turn it in for harder ride and turn it out for softer. You can feel the click just as if you were using the Remote adjuster. To change it, just turn it all the way in and turn your adjuster...
What is the part number for the 13mm sway bar for an 07 Apex. What other parts do you have to change when installing the new sway bar, and is it a huge difference?
I am running that track on my Apex, fully clipped so i can run my Wahl Bros external drivers. I am very happy with it's preformance off trail and it's hook-up on trail. It is fairly light too. The only problem I have is slider wear went from bad to worse. I don't like the clips it comes with and...
Just over a hundred bucks buys you the new face plate. If I were your dealer I would sell it to you for cost, but I wouldn't have too cause I know my Rep would try his best to help you out. Remember your sled is getting to be three years old and rubber is kind of a wearable item. I agree with...
Great, I am excited to try mine. If it works that good, I could likely find about a dozen other customers. For '10 all they did was take the heat away from the hooks and make the heating coil smaller so it doesn't take as much juice to run. doubt it will be the answer. The 2010 Nytro and Vector...
Sounds like you got a problem with your rep. If they would have got a hold of your rep i'm sure they would have put it through. It is always better coming from the Rep then the customer. What did your dealer have to say? Why didn't they get a hold of your service rep. Something doesn't sound...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.