Search results

Anyone see the Bank of America commercial with Johnny skeptical setting at the table—- saw him on another commercial too but can’t remember what it is—- Tod

Anyone have this jacket in large that they want to sell

headed To Novi on Saturday if anyone would want to meet there for this exhaust— from a 2019 sidewinder…. Tod

What is the mod for the chain case at the drive shaft bolt?? Can’t seem to find any info if I do a search. belive this would have to do with the bolt coming out and damaging the case cover— Tod

Chain case area was making a noise that sounded like metal against metal or a bearing going out… Took the whole chain case apart and can’t find anything wrong…clutch side bearings seem good too.... Could a worn out chain do this or can I have a bearing that feels fine to my fingers with no play...

What do you think about this repair. Will it be ok having a longer bolt compared to the shorter stock one? So last year my top bolt came loose on my spindles -this then egged out the top hole— so now the small gap has been completely welded shut —along with welding the egged out hole shut and...

just a thanks and a shout out to Tom for my trivia prize--and thanks for this site--I don't post as much as I used to but anytime I need some info I know where to go----Tod

just wanted to say thanks to Tom for my trivia prize-----Tod

not sure how good these pics are but I am thinking picture B is the correct way but could someone look at their nytro and see which way this linkage is supposed to be---this is the bottom of the front shock in the rear suspension of a 2010 nytro xtx.....thanks Tod

The two bolts to remove under the seat closest to the flex pipes or closest to the dounuts that hold the Y pipes to the tunnel.....are they 5m allen heads or are thay torx heads?? Mine have never been done and are pretty rusty, I cant really get the 5mm allen socket in there and it really does...

Does anyone ever skip a season on changing the oil filter? I have never done this and I always change a filter anytime I change oil. I only put on 1200 miles so I was considering only changing the oil this time. Tod

Myself and friends need some track clips and the track clip tool for our stock Apex\Attak & RX1 tracks. What track clips are people using and is there a part number?? How much are the track clips?? Is the track clip tool from snow stuff any good?? Thanks, Tod

Should my Attak have this cable holder? This is a picture of my friends 06 RTX.

What do you think?? No big deal? I have not taken the seat off to investigate further but I do not think this is anything major. I think this is my own fault for having the suspention too soft on my first ride of the season. Tod

On my 06 Attak and my friends 06 RTX it seems as if the rebound dampening is not right. Push down on it and it seems to spring back up a hell of allot more than my 97 700SX and our other friends RX1. It seems fine on the trail but play with it in the garage and it seems to rebound with not...

Are the forth wheel axle spacers the same lengths as the axle spacers found in older kits that were for the pro-action skids. I have several in a box (4th wheel kits) without the wheels. Tod

I just put studs in my Attak and didnt even think about the shock adjuster cable when I removed the rear skid bolts. By letting the rear of the skid drop down lower did I mess up my cable?? I will look at it tonight when I get home. Tod

Do the exhaust covers get pretty hot? Can you put decals on the exhaust covers without them melting or getting screwed up due to heat? Tod

Just joined the four stroke crowd. Picked up a used Attak with 750 miles on it. It came with a cover, skid plate and extra belt. now what size studs and how many do I put in that 136????? probably need some skis too.....? Tod