• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. gpxsrx

    Bell Crank Bushings and Install Tool

    Then ran hose out side of bulk head
  2. gpxsrx

    Bell Crank Bushings and Install Tool

    Here is where I put mine with a 18 grease gun hose
  3. gpxsrx

    Steering play

    This is what you need to take slop out
  4. gpxsrx

    Steering play

    https://www.mainwaysolutions.ca/ The steering pivot is the problem
  5. gpxsrx

    Law for modified exhaust in Canada

    I do have a quite Hurricane muffler I’m going to install just have to send PC5 to Dave@ Hurricane to change the mapping.
  6. gpxsrx

    Law for modified exhaust in Canada

    No person shall drive a motorized snow vehicle unless it is equipped with a muffler in good working order and in constant operation and no person shall drive a motorized snow vehicle which has a muffler cut-out, straight exhaust, gutted muffler, hollywood muffler, by-pass or similar device upon...
  7. gpxsrx

    SRX front springs on other models

    I put the heavier side up.
  8. gpxsrx

    SRX front springs on other models

    Thanks for the heads up.
  9. gpxsrx

    SRX front springs on other models

    Thanks I just got around put front coils on today. Noticed in your picture that the coils look like they are upside down I don’t know if that will make a difference or not. I looked up images of 2021 yamaha SRX and they show the tighter coils at the top of the shock. I’m guessing it only matters...
  10. gpxsrx

    Measurement preload front srx springs

    Put a set of 2019 srx dual rate front coil springs on my viperwith QS3 shocks looking for a measurement for preload. Thanks
  11. gpxsrx

    Bell Crank Bushings and Install Tool

    No just rivets
  12. gpxsrx

    Bell Crank Bushings and Install Tool

    What I did is drilled out added 18” grease hose and put outside. Never replaced plastic bushings but helped. Next summer I will do your brass kit. Very nice job.
  13. gpxsrx

    SRX front springs on other models

    I changed my stk front end to a Zbroz 45” looking at SRX front coils to lower my front end on my Sr viper. I’m using QS3’s and want less pre load on front coils.
  14. gpxsrx

    2016 XTX rear cross shaft

    Thanks Travis that’s what I did.
  15. gpxsrx

    2016 XTX rear cross shaft

    Picture of cross shaft
  16. gpxsrx

    2016 XTX rear cross shaft

    Working on a 2016 XTX 141 uncoupled rear skid. Rear cross shaft snap ring popped out of position and upper idler wheel basically moved over to rear mount and cut the wheel thin like it was done on a lathe. Shaft is junk now . Do you see any issues if I get a new shaft made eliminating the snap...
  17. gpxsrx

    bogie wheel drama on 2015 viper xtx se 141

    Bottom hole in front Middle hole in rear Remove inner wheels
  18. gpxsrx

    bogie wheel drama on 2015 viper xtx se 141

    I believe it was 2016
  19. gpxsrx

    bogie wheel drama on 2015 viper xtx se 141

    Yamaha had a update to remove inner wheels due to interference like said above.


Back
Top