Search results

Buddy of mine got 16 viper turbo blue it up so he put a nytro engine in it now he tells me that the temp only goes up to room temp 11-13 degrees on the gauge temp light stays on no matter how long it’s running for Any ideas out there thanks

Hi any idea how much boost I should be seeing with the 325 header tune thanks

Hi I am looking for a turbo actuator who sells them I had a few companies found but lost there info thanks

Hi guys I am looking for info I am running around 35-40 psi had a 5558 turbo now 68?? Forget the actual size but it’s big. Trouble I have now will not spool it up past5 pounds on the 2 step,,5558 no problem shoots up to 10 pounds no issues. Any advice will be great or do you know someone who...

Hey anyone out there know what wire is it that comes out of the dash harness that will activate the tach in the dash I’m putting it on another project and just needs the tach to work Thanks

Tuned winder, I hear it’s a glitch throwing the 24 code, how can I clear it from my dash thanks

Any guys out there run this system on the rx1 I am about to buy it from a guy for a rx1 race sled that i am building. Thing is I no nothing about it, I’m planning on running 32-34 pounds of boost range and looking to build boost off the line. Guys tell me it will work with carbs others say only...

Guys picking up a new 2017 sidewinder next week trying to decide on the right model I'm looking for the plushes ride I have a bad back, my thoughts was on the 137 se. I currently have a 2014 viper ltx hate the ride very very stiff for my weight I also has a 2014 zr 9000 129 much softer I sure...

Her goes I'm going to burn my 1100 turbo 225 flash loads of cash gone alignment bars, shimming motor, floating secondary, engine bumper stop, clutching , venting and and a million hours picking at the junk 4 Polaris belts 250 a pop and now a belly pan $300. I installed the trail turbo on my...

2013 mpi stage 1 no ic all stock motor cold weather the thing flys for 5 pounds of boost but when the temperature rises threw the day it feels like i lost 20 +hp any ideas out there please would ic fix the issue or a cold air intake

anyone out there with a supercharged nytro have starter problems i have been towed 2 times now way back in the country pulled the starters they both have the opoxy melted that holds the magnetics in place causeing it to stop working , anyone with anything that would care to share im stumped here...

2013 nytro, 2000 km on machine last week i got stranded 60 miles in the woods sled would not engage the starter, took starter of once home starter was fryed inside melted alot, so put on new starter and a new solinoid/ relay started up fine tryed it 5-6 times left for a big ride and 80 miles...

mpi supercharger nytro anyone know at sea level 26 bottom 28 top what that should give me boost # and if i go 27 bottom what with be the increase thanks

2013 rtx is killing me i have a bad back im looking for any info on changeing to another rear suspension out of another brand name of sled i have a f1000 and man what a difference i really love my supercharged nytro but it causes me to much discomfort, just woundering if guys out there changed...

2013 rtx mpi charger 6-7 pounds of boost do this clutching sound right 53/41 helix purple spring wraped at 0/1 ,,, blue silver blue in primary with supertips can i get some feedback please sled just dont feel like its pulling to me,,, thoughts thanks

nytro rtx stage 1 mpi 5 psi new clutch kit they sent me 50 g super tips blue silver blue primary spring 53/41 helix purple spring wraped at 0-1. my issue is it hits rev limited soon as u squat the trottle heels loaded with 2 tungstens and 2 washers middle empty tip empty,, then i added few grams...

guys anyone out there that knows someone i can talk to just installed the 185 mpi super on my nytro have a few questions thanks

i have a 400 hp block from dave at hurricane thats bored 40 over im looking for a headgasket anywhere i can buy them i called him past 7-8 days cant get ahold of him thanks

hi guy im running 25 pounds boost rx1 engine but its in a f7 chassis super tip weights around 90 grams black green dalton spring, 51/45 helix wraped at 70 on spring. am i even close or should i be heading in a nother direction . i drag race 800 feet only 151 long 13.5 wide 2 inch finger type...

i have a big race comming up i just changed my base weight im looking for some info on clutch setup vs spool up time.. rx1 in a f7 body 25 pounds of boost stock yamaha clutch thanks guys