Search results

Hi Guys, Just installed some doo extros and it seems like me endcap is hitting the driver. I know that i need to trim but Can somebody show me some pics of trimmed caps or rails? I tried to drill the rivet and they seems to be welded in the hole. can't drill them. 2010 are the same? any tips or...

Hi, I have a little problem of idling since i purchase the sled 4 year ago. I checked everything in the last 4 winter and found nothing. no codes, anything! Trust me, have done lot of test and change. I start to think that the ecu is in problem... Good news, my friend have a nytro exactly the...

yesterday sled was running good and today, start and run 10 seconds then code 30 appear... checked my oil level and really strange. really thick and stange color. It is only cold or mixed with prestone?? any idea? bad news?

Hi, I have a 10 nytro xtx with backcountry. always got 160kmh at full speed or at least 155, This year, i only get 135.... The only maintenance i've done is replacing some wheels bearing in the suspension. I suspect, track too tight/used slide/clutch spring? it is possible to lost that much...

if anybody that had removed them to replace for 14.5. I want to buy your stock one. let me know what you have and pm me with a price shipped t0 g0j3k0 quebec canada! Thanks,

Hi, I installed a temp gauge and when installing, i lost some coolant. Can i just add some water or do i need to put coolant? What type of coolant? It's completely stock so probably yamaha coolant.

Hi guys, I need your help with my nytro xtx 2010. It have some problem to run at idle. It stays at 1000-1050 rpm before getting up slowly to 1300. When i hit throttle, it rev ok but after that it get down to 1000. It can also just stop. Then i need to give some throttle to start again. It is...

Hi guys, I need your help with my nytro xtx 2010. It have some problem to run at idle. It stays at 1000-1050 rpm before getting up slowly to 1300. When i hit throttle, it rev ok but after that it get down to 1000. It can also just stop. Then i need to give some throttle to start again. It is...

Hi guys, I have a great questions for you. My nytro won't idle by itself correctly, it idle very low at cold(1000-1200) rpm and then stop. when stopping at a crossroad or on the trail. it always stall. then i need to restart and give some throttle. if i keep my finger on throttle, it's ok...

ok here the situation. can somebody help me. fx nytro xtx 2010 the problem was present when the sled was stock. nothing related with the mods i run the sled over 8000km like that afterr i bought it used. the problem is that as soon as i touch the throttle, the engine stop. after that, i need...

Hi, I just replaced the bushing into my supertips weight and they are reallytight. Do i need to tight the set screw all in? cause the weight can't move that way. i can't move them manually, do i need to leave the set screws kinda loose for the bushing to make some room? Then i will be able to...

i'm looking to buy a trailtank but can't find any retailer in canada. Asked the company but got only a seller in United states without any online store. Anybody know where is the best and cheapest place to get it in canada? Or anybody have one for sale?

Hi guys. really need your help This weekend, i was riding and my nytro begin to stop and start Checked the gauge and no code or shutting down happen. Now it trying to start but no fuel is injected Checker my plug, fire, fuse, relay. Everything was fine. Battery was draining itself. So...

Mine is good for trash, anybody had one laying on his shelf?

anybody as put some universal screen circle or square from frogskinz to vent the clutch In the front the side panel or on the side? some pics? I don't want to put a whole kit cause i already have all hole covered with screen. Just need to put some air into my clutch and not snow.

I've replaced the bushing in the center of the secondary this week and yesterday was out for the first time with it. after around 60 km, the sled start to vibrate and secondary was very hot(enough to melt the nylon buttons) It is possible that the bushing is the problem? anyobody already...

hi guys, Here is my setup nytro xtx 2010 1.75 k&n power commander 5 ulmer clutch kit full hindle exhaust great setup but i need to replace my hindle for the stock header/muffler for the weekend. I just did the switch and did a test. lost RPM and top speed. Need to regain some...

Please if you have Facebook, Like the pictures of my nytro. thanks Contest Picture

Hi guys, I have some question about these. Anybody have this setup now? What's the difference? Any gain or lost? what exactly i need to buy?(kit, wheel, size)?

Hi guys, I've sealed some hole with vent screens(side mesh, holes each side of the steering post.) But some snow keep entering the hood. Seems to enter from the space around the light and the stripes under it. Anybody have a hint except removing the headlight? i have some pet screen left...