• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. loafer

    No spark, cranks good.

    Thanks for the info. My next job it to pull the pickup coil and check the gap. That could indeed be the problem. I know I can check the ohms on the pickup coil but can I check for output when the motor is cranking too? I'm actually out of town for the next month, so I'll put this on hold till I...
  2. loafer

    No spark, cranks good.

    No, I used an aftermarket stator. Crap, How would i go about measuring that gap?
  3. loafer

    No spark, cranks good.

    Sigh, and I had such high hopes for the ground blocks being bad. I found 3 crimped ground blocks, cut and soldered one of those, the rest were good. I found the ground block socket with the bridge. That was clean and dry but i touched it up and applied dielectric grease anyway. I cut away some...
  4. loafer

    No spark, cranks good.

    I've just read those posts, thank you. That seems like a likely place to look. I'll get at it tomorrow and update you.
  5. loafer

    No spark, cranks good.

    Update, new stator/pickup coil.... still no spark! I'm kinda lost... no I'm a lot lost. Anyone have any suggestions for me? Thanks in advance
  6. loafer

    No spark, cranks good.

    I've tested the stator but I'm not getting consistent readings. I don't like the meter I'm using. my next step is to use another meter and then compare those to a known good part. At the stated .26 ohms or so, imho, it doesn't take much to throw it off.
  7. loafer

    No spark, cranks good.

    Sorry, I originally posted this in group specific but didn't get it fixed. It's a 2007 vk pro
  8. loafer

    No spark, cranks good.

    I'm stumped.. I've checked the ignition, kill switch, connections, coils, plugs...no spark still and without it running I can't get codes... have I got that right?
  9. loafer

    No spark, cranks well

    So, is there anyway to see error codes if I can't get the sled to run?
  10. loafer

    No spark, cranks well

    Yes, verified no spark with a grounded plug in the cap/coil
  11. loafer

    No spark, cranks well

    Update...I checked my buddies carbed venture and it is quiet too when in the run position so that isn't an issue I'm thinking. Ive gone through the trouble shooting chart in the service manual. Ignition good, kill switch good, checked, cleaned and dielectric grease on all connections. checked...
  12. loafer

    No spark, cranks well

    What should I hear when I turn the key to the run position . ... fuel pump, solenoid ? Should I see any power at the instrument pod?
  13. loafer

    2007 Phazer won't start. FIXED!!

    Thanks again, DF and everyone that chipped in. Sled is put back together now, working perfect
  14. loafer

    2007 Phazer won't start. FIXED!!

    We've had 3 1/2 ft since Christmas and a dirty night tonight also. Just moved the truck and had about 6 inches on it. Going to hit the trails tomorrow
  15. loafer

    2007 Phazer won't start. FIXED!!

    fixed without the airbox. I wanted to let good gas get all though it before I put it back together. My garage is attached to my house. I put it outside to save on fumes in the house. Happy wife, happy life
  16. loafer

    2007 Phazer won't start. FIXED!!

    TaaDaa!! warming up as I type this See attached pic. Notice the exhaust ? Changed the gas and way it goes!! Thanks for all the help guys, felt like I had 5 ppl in the garage working with me
  17. loafer

    2007 Phazer won't start. FIXED!!

    I'm draining the tank and putting fresh gas in. As I said earlier in this post, the only things that changed from working perfect to not working was cold and new tank of gas. I thinking I must have bad gas although that would be a first for me ever. I'll let you know how it goes.
  18. loafer

    2007 Phazer won't start. FIXED!!

    ok, I have fuel or something resembling fuel. I checked the injectors while cranking over and I can see mist spraying out of them. I'm going to change the plugs and check for spark again. I'm just rambling but, if it catches on prime but doesn't start, its possible ..... let me check before I...
  19. loafer

    2007 Phazer won't start. FIXED!!

    Is there a time limit on updates that anyone knows of? This machine was stored for 4 years so it has seen very little use but almost no updates performed. I have an email in to Yamaha Canada now asking the very same question
  20. loafer

    2007 Phazer won't start. FIXED!!

    Possible Mar. I 'll check it out


Back
Top