Search results

I ordered these. They fit in the valve cover. Have not fired it up yet. Carbs are off at this time. No clue how long they will last but they grip the plugs well.

I think its just right. I am 5’11” seat puts your knees well below your hips. Got little over 5k miles on the seat/riser combo so far

It wasnt too bad. I used an air stapler to install their foam and cover on my stock seat pan. Its like riding a different machine. Foam is pretty dense and gives good support

Forgot to add that im using a wrp seat.

On my 05 i used a 2 “ from powermadd. Part number 45419. No issues

Change the first set of zeros to 22. Didnt paste correctly

Might be 4KM-14142-00-00 Looks correct according to what im finding on the internet

Call them or port yamaha to confirm the right part number it may have changed

Thats the number on my receipt when i ordered from babbits. For the 22,5 pilots

4KM-14142-17-00

Little story here. Replaced exhaust donuts. Rear of sled is up in the air,way up high. Started sled to make sure exhaust was not leaking. 2 of my carbs were squirting like yours. I scratched my head cause the carbs were rebuilt and synced and ran perfect prior to the exhaust issues. Once i...

Did you swap all those items at once? Try swapping one thing at a time. Easier to find the gremlin

This was all I had left on my fuel pickup lines

after rebuilding the carbs last year, I decided to synch the carbs with the carbtune I recently purchased. So i go out to start sled and had a hanging idle at 2500 rpms and when it did drop a minute or 2 later it stumbled at 1000 rpms. If choke was applied just a frizzle the rpms would climb...

Worked on one like this today. Added Woody's doolies 4inch. Set the front suspension so the arms are parallel to the ground and shimmed the skis. Left limiter strap all the way out. Track shock set at maximum. Tested well for the trails we had. Work in progress.

Thank you! Rock!