Search results

Not the pilot jet had the carb off and ran it through an ultrasonic carb cleaner,blew out all the passages put it back on and same #*$&@ it just will not start when its cold also it spits and sputters around 25 mph wont go any faster

I'm having a tough time getting my Rhino started when its cooler outside, seems like if the temp is below 50 it wont start,choking it doesnt help,starting fluid doesnt help, the only way it will start is if I put propane to it. I'm going to go through the carb tomorrow at work hope I find...

The only way to get the clip is to buy the complete cv boot kit that really sucks

Thanks I'll give that a shot

I'm having troubles with my right rear axle coming off the diff shaft. I heard someplace that there is a differnt style c-clip anybody have the same issue??

Not over full on oil, and yes I followed the hose all the way down to the side cover,however I'm wondering if thats a check valve that the hose connects to because I cant blow through it.

well its not a kinked hose because it does it with the airbox removed, oil comes out the large hose that attaches to the top of the air box. Guess I'll have to do more research

K thanks I'll check that

Please help I have a 07RS Venture and an 07 RS Rage that are both putting oil into the air box, When the sleds are running its a steady flow of oil, I cant believe both would have a faulty crankcase vent valve. ANY HELP PLEASE.

Thanks

Where do you find the oil filter on a 2007 Venture ??

Yup I flushed and refilled the cooling system,checked again and I only have .032 volts DC according to what Ive been reading thats an accetable reading.

Doing some routine maint. on the ol Grizzly and I noticed a pretty good electric charge in the rad. Anti freeze is nasty and the hose fittings on rad. are disintagrating, running a check on all ground wires to see what comes up but I thought I'd mention it in case someone else had a similar...

Clutch's do go bad at least parts of them do, check the pins,rollers, and bushings,then sync your carbs raise the idle a little and you wont have any noise.

I just couldn't see spending any more on that sled, And I can't see spending $12,000 for a new one either so I'll just update every so often with a couple years newer sled. But a new one for $12,000 and as soon as you load it in the trailer it drops in value to $10,000 then next season it's...

Yep after spending hundreds to upgrade my 03 RX and still not being happy with it I went to a Mach Z 1000 SDI handles and rides way better, doesn't have that nice 4 stroke sound though and I do miss that. my problem is carpal tunnel in both arms I just cant man handle the Yammy all day any more...

First of all I'd say that's a real piss poor design to start with, built way to light, Weld it up, improve the design and show mountain performance how it's supposed to be done. I'm so sick of companies make crap and not standing behind it. I guess that shows a real lack of customer care...

You might have broke your bulkhead, look at it where the a-arms fasten,check for cracks.

they all do it, I took 2 bearings and a longer bolt put one on each side and it works great. I think Ulmers might sell a kit that does the same thing.

Had a similar condition had to sync. mine cleared it right up