Search results

It seams the gauge display clusters is gone on my son in laws 2018 btx viper. the gauge only light up and flashes Genesis 4 stroke. Everything else works on the machine, light high and low, hand and thumb warmer. when you turn the key it flashes and it still flashed even after the key it...

Took machine apart and did my yearly maintenance. Never found any major problems . 9000km and sled. Some pick of Top gear, brake side bearing and jack shaft bearing. Bearings were packed 7600km ago. top gear has 9000km on it. I also compare the top gear of this machine with 9000km and top gear...

Hand warmer on left side stopped working, the other one works fine. so it not the switch on fuse. Any thoughts on where and what to start checking? I was think the element is gone. Have not checked anything yet.

These are pic of my plugs after about 600km with the new flash and air box mod. I think they look good.

I had the rear suspension out of machine and did all bearing. I though I put the clip in all the way. #40 on was the one that let go. https://www.yamahapartshouse.com/oemparts/a/yam/5612a23487a8660be46e82d7/track-suspension-2 I had the suspension out and put 2000km on machine before it let...

Picked up this 2016 xtx se with only 1400km. I think I got a great deal $7300 ca. Machine is in excellent shape , not a mark on it Installed a skid plate, higher windshield, gas can and bag on the back and 4 wheel kit on the way. Also changed out the skis. . Ready for the snow .

Was it the last flash when they deleted the Oxygen Sensor or the one before that? The reason I ask in I just picked up a used 2016 xtx and I un plugged the Oxygen Sensor and it threw a code. plugged it back in code went away. Just wondering what flash it as. Starts fine. It was purchased Jan 2017.

I picked up a used 2016 xtx se sr viper with only 1400km for a real good deal and in mint shape When I started checking everything I took the secondary off to check the jackshaft bearing there was only one washer behind the secondary. + the clip. My other viper std dx 146 as 2 washer there...

Planning on picking up second sled tomorrow, one of the below 1, 2011 vector ltx 136 track , 5800km $2000 has some damage , bulk head broken and some other rubs and little marks , little tear in seat, can get of of 250$ ca so total would be $2250 and had tp tear it down and replace bulk head...

Planning on picking up second sled tomorrow, one of the below 1, 2011 vector ltx 136 track , 5800km $2000 has some damage , bulk head broken and some other rubs and little marks , little tear in seat, can get one for 250$ ca so total would be $2250 and had to tear it down and replace bulk...

I'm thinking about picking up a used 2011 rs vector ltx gt 6000km. Have not looked at it yet but did see pictures and talked to the guy. seams in real good shape. When I go look at it what should I look for? what are the common problem this sled has? tks

I took my chain case apart 3 times over the winter as I was leaking chain oil. Put a new gasket on it and even tried gasket maker. Nothing worked. So today I took in apart looking for a crack. Once i wiped away the oil I could easy see the crack. . No damage to the chain case anywhere so put it...

A friend of mine got a new left over 2017 btx from the dealer dec 2017. Today lost the jackshaft bearing only 3500km. That seam real fast. I got 18500 on mine and it still going. Have anyone lost a jackshaft bearing that fast? The worst par we were 35km from the nearest road. so we nursed it...

When are you guy changing your bearing? I have 17500km on my 2016 stx dx and the only bearing I change was the bearing in the break caliber because when repacking it I seen a little rust.. I do repack all the bearing every year. But have not changed the top or bottom bearing in chain case...

When I start my machine the first time in the morning RPM goes to 1700 normal but then drop to 1300 for a min or so then goes back to 1700 tell warm and drop to the normal 1500. The drop to 1300 only started lately , sled now has 17500 km 2016 stx dx 146. Sled work fine and no problems but...

Took chain case apart because I had a leak from around the gasket. Seen that the reverse chain put a wear mark on the cover. There is 15000km on sled.

2016 stx dx 146 , stock. I have never had this problem before but 2 out of the last 4 times I stared the machine it backfired (small ) and started up. Once warm and once cold. Sled now has 13700km . Put new plugs in at 13200km. Any think I should check?

How often do you change your plugs on viper? I have 12300km on my sled and have not check of changed the plugs. Have not had any starting problem , I warm engine up before turning off. But maybe I should change them now before the season starts?

My Daughter Boy Friend got a new left over 2017 BTX viper. Picked it up last week from dealer. I told him to bring to my place and we would check if over. I guess they never did a very good pre inspection before they gave him the machine. -The plastic brake disk cover by under left foot was...

Well this windshield work on the BTX viper? All models are listed except the btx 's amd MTX" Is it because of the handle bars may hit when turning...