Search results

Does anyone have a tutorial on where the idle adjustment screw is?

Looking for the factory setting for idle speed on a warm motor and location of adjustment screw.

Welcome and thanks for posting.

Thanks guys.

I want to install The Greaser and need to remove the Secondary to gain access to the Jackshaft. First time messing around with the clutches so what's the drill in removing the secondary? Just remove the 14mm bolt? Any washers or spacers I need to keep an eye on? What about reinstalling? No...

Thanks. Always a good resource to view before tackling the job. And I found out there are two zerk grease fittings behind the nose cone.

I would clean it probably every 2 years. It's easy to do so why not. Use Contact Cleaner spray.

Thanks Rob. Mine stays on the lift as well.

Any merit to loosening the track and removing the drive belt as part of the annual spring fluid changes in preparation for summer storage?

I'm going to use contact cleaner.

Thanks very much. Always clearer to understand with photos. Looks straight forward.

Thanks guys. I will be doing this step in conjunction with end of season oil and filter change. First time cleaning the screen so it needs to be done. Will make sure oil tank is drained first.

2012 Apex XTX. First time procedure, need guidance.

Glad to be able to help Tim.

I use Double Take Mirrors. https://www.doubletakemirror.com

Can the ecu in the Apex be re-mapped to make throttle tip in smoother and less abrupt? I have the soft spring in the clutch. It’s not that. I find the throttle extremely sensitive to thumb input. If you're not really smooth with throttle application power comes on like a light switch. I would...

2012 Apex XTX , I'm getting code F_000. Does anyone has a list of code readings? Is this just an early low fuel warning? Seems a bit premature given I still have 2 bars left.

Are Roc's HID set up Plug and Play or is there some work to do to get them installed? Anyone have a tutorial on the install?

I didn't want to lose any seat time by taking it to an upholsterer during the riding season. Turns out, I drop it off on a Friday morning and tell him "no rush" and I get a call on Saturday telling me it's ready to be picked up. Go figure.

WRP snowmobile seat line has been sold to Seat Concepts. I ordered the new foam and cover from Seat Concepts back in January and now that the season is finally over I got around to having it installed on the stock seat pan. I took it to a local upholsterer who does motorcycle, snowmobile and...