Search results

My 2008 nytro, was running fine today. Then it shut down. Got it restarted, idles fine, will engage throttle, and move sled, but as soon as I drop the throttle harder, to accelerate, it will die and shut off. No codes on the display. Is this fuel pump, or can the pump line be clogged ?

Looking at these. They say they have the yamaha connector, but doesnt say for nytro, looks like a 3 pin connector on them, not in front of sled, but I thought the connector on our nytro was a 2 pin connector so maybe they wont work? I think it said somewhere, these are for the sidewinder, or...

on my 2008 Nytro rtx, when putting skid back in, I could not get the two washers that are placed between the inside of the front tunnel and the skid to stay in place, tried some grease , and they still fell out every time I tried to put the skid in, so I left them out. Just wondering what kind...

i have the skid out, 2008 rtx, I’m looking at the limiter straps, the front and rear are both set to make the straps the longest. Looks like I see 4 holes that it could be shortened with Is this set for maximum weight transfer , and what is the stock setting for both straps ? I did notice the...

What actually moves when you tighten the right bolt , looking from rear of sled, the track , or the skid ? In other words , when you tighten the right side adjuster bolt, does it pull the track to the right, or is it pulling the skid frame to the right ?

I know most people are switching over to copper donuts versus using the graphite ones, is there any chance that the copper ones could cause the titanium pipe or the header pipe exhaust flanges to crack ? The reason I ask, the graphite I would think would have a little flex between the pipes...

On an 2008 nitro rtx, 121 skid, what’s the easiest way to get shocks out ? The front shock in the skid is leaking, so they need to be rebuilt, So, I’m not the best at getting skids back in, so is it a nightmare to try and pull them with the skid in ? It looks tight to get the wrenches up in...

As many have said, the two Allen headed bolts that hold the exhaust y pipes to the tunnel aRe a bear to get out, I was able to use an easy out to get one out after the Allen bolt stripped, but the other one actually broke the nut off from under the tunnel, my question is.. I haven't gotten the...

I tried to remove the rear skid bolts last night on the apex, but when you turn the one slide the other side turns, does this require two people, one with a socket on each side ? I got the one out then the other side just spun and would not loosen. What's the way they should be removed.

i know theyNow make the “red” fuel relay that is a solid state relay, do they make the starter relay in a solid state relay, if so what is part number, or can you use the fuel relay as a starter Relay ?

06 apex gt. I put mobil 1 full synthetic grease in this bearing every spring, this past year, I barely put 300 miles on the sked, checked it this spring, it looked almost starved of grease. I don't pull the bearing to grease it, just pull the dust seal, and pack . Maybe it isn't getting enough...

08 nytro rtx, I have a barker exhaust on it now, but want to go back to stock exhaust , which I bought off ebay. Question is what parts do I need ? I believe the front clamp was used to attach the barker, so I don't think I will need that, but it looks like I need the rubber exhaust gasket...

i tried removing the rear axle off my 08 nytro tonight, I got the nut off of the left side, but the right side will not loosen up, I tried putting the left side back on , and tighten it down, thinking that would let the right side loosen, still no go, So how do I get the right side nut, or bolt...

I bought one of these. . http://www.extrememax.com/product-p/5800.1045.htm Question. The jack screw says before use to lube it with gear oil, wouldn't it be better to use chassis grease on it ?

2008 nitro, try putting it into reverse while its idling, won't go, shut off engine, then it slides into reverse with no problem, same when trying to shift from reverse to forward. But, if I take the weight off the track by raising the rear of the track off the ground, it will then shift into...

Can you use 100ll aviation fuel in the 4 strokes ? I know you can't in cars , can destroy oxygen sensor, cat, etc.. But what about our sleds ? I was thinking of putting some in for storage purposes only, over summer, since AV gas won't break down like gas with ethanol.

I don't replace the driveshaft bearing and Jackshaft bearings every year, but I do pull the bearing seals covers, and repack them with grease, The bearing seals can get bent over time , does anyone know the part number or where I could get just the bearing seals for both the clutch side...

They have it listed as 94 db, but not sure how they tested, I believe NY tests at 4000 rpm and 12 feet directly behind sled. Or is it 12 feet to the side of the sled and a 88 db limit. Makes a difference. Nytro has the rear exiting exhaust. Probably quieter to the side, anyone ever go through a...

Left hand warmer not working, shouldn't it throw an error code ? I pulled the connector, it shows open on my ohm meter .

It seems it is longer , anyone else use this filter, I did see the thread where some guy blew a motor because the longer filter Hit something