Search results

I am currently building my 2007 attack. I am replacing the 136” mono with a 151” 2017 (700 mile) venture suspension ( pivoting rear rails). I am building a different sled as Yamaha has never done something in between on an Apex. It’s either 144 or 162”. I am putting 8t wahl drivers into it also...

I am currently building my 2007 attack. I am replacing the 136” mono with a 151” 2017 (700 mile) venture suspension ( pivoting rear rails). I am building a different sled as Yamaha has never done something in between on an Apex. It’s either 144 or 162”. I am putting 8t wahl drivers into it also...

Headlights crapped out on my 2008 vector . I have no high or low beam lights, but the tail lights work. Unplugged the hid lights and put stock bulbs in, nothing.... High beam indicator is on, but no lights. Thoughts?

Headlights crapped out on my sled. I have no high or low beam lights, but the tail lights work. Unplugged the hid lights and put stock bulbs in, nothing.... High beam indicator is on, but no lights. Thoughts?

Hi guys I am replacing my timing chain/stub shaft bearing on my 2008 Yamaha vector LTXGT. I had to pull the crank out to get the timing chain off, and now I’m not sure about the crankshaft/ balancers. Does it matter how you put the crank back up and in on the balancers gear teeth?? Like if it is...

Hi guys, I need a little help. Those of you with stock Apex xtx rear suspension, I need to find out how wide the shock eyes are on the center rear shock on the skid. Why I ask this, is I need to know if the Apex xtx rear shock will work on my Apex mountain suspension, I know the shocks are the...

Hi guys so I wanted to replace the spark plugs on my Apex, and 2 out of the 4 plugs this is what I found!! Sled has 4,300 miles on it runs great, just wanted to replace the spark plugs. These are the 4 spark plugs out of my Apex. Why all the rust around the spark plugs/ coils? What is this from...

Hi guys so I wanted to replace the spark plugs on my Apex, and 2 out of the 4 plugs this is what I found!! Sled has 4,300 miles on it runs great, just wanted to replace the spark plugs. Why all the rust around the spark plugs/ coils? What is this from? Note the coils where fully seated down on...

Hi guys on my 07 Apex mountain I have a 23T top gear, and I think stock bottom 40T gear on it. I want to add reverse to this sled, so am going to buy a good use complete chaincase from a Apex gt. Now I know the gearing is going to be off. My question is I want to set up the new chaincase to have...

Hi guys on my 07 Apex mountain I have a 23T top gear, and I think stock bottom 40T gear on it. I want to add reverse to this sled, so am going to buy a good use complete chaincase from a Apex gt. No I know the gearing is going to be off. My question is I want to set up the new chaincase to have...

Fyi I also posted this under the Apex mountain section, but there does not seem to be as many guys on that area as the Apex general. So here goes, guys I have a 2007 Apex mountain with 3,000 miles on it, all stock. I am bottoming out pretty easy on the rear skid. The torsion springs are set to...

Hoping some you guys can help me out on this issue. On my Apex I was doing the oil change and when I took the access plate off for the drain bolt (motor drain bolt) a huge nut fell out of the access plate. So I found out where it goes, goes to one of my front motor mounts on my sled. Now that...

Hi guys, so I have a 2007 Apex mtx I bought with no reverse. I am wanting to add reverse to it. So I can get the whole complete chaincase with reverse for around $340. Here is the problem, the ones that I am looking at are for gt/ ltx models so the gear ratio's will be off. So my question is can...

Hi guys. Currently I am driving my 08 vector. But want to get an apex mtx, for off trail riding only, and keep using my vector for trail riding. So there is a 2007 all stock apex mtx for sale near me, with 2,500 miles on it. The problem is, no reverse on it. What are the part numbers for the...

Hi guys. Currently I am driving my 08 vector. But want to get an apex mtx, for off trail riding only, and keep using my vector for trail riding. So there is a 2007 all stock apex mtx for sale near me, with 2,500 miles on it. The problem is, no reverse on it. What are the part numbers for the...

Hi guys. My sled is having the same issue again as it had at 18,xxx miles. What happened at 18,xxx miles was both fuel pumps started leaking when it sat over night. Thus mixing the gas with the oil/ hydrolocking the motor up when you went to start it the next day. Thankfully I did not damage to...

Hi guys. So my 2008 vector ltx gt has 22,000 miles on it right now, and still on the original track, so I am going to be replacing it this summer. I know you can fit a 1.75" track on them, with the tunnel protectors removed, which I am fine with, as I never run studs. My goal is to make it more...

Hey guys. So tonight I was taking my carbs apart for a cleaning, and took these out. Which I believe are the pilot screws? Anyways I took all the jets out, floats off, the pilot screws out, and am going about blowing out my carbs. Then all of a sudden there where parts flying up into my face...

Hey guys so here is what I have done so far. Charged the battery up to peak, I installed the new Bulkhead saver kit, Hid lights, 13MM sway bar, with new bushings, took the seal off of the jackshaft bearing, and drive bearing, and repacked them with new grease, took the clutches off (on the bench...

Just wondering what you all are doing/have done to your Yamaha vectors this summer. I still need to take my whole rear suspension out, grease every thing up, clean the clutches, install a new fuel pump, change the motor oil, new slides (DuPont). And the only mod/ necessary part I am going to get...