Search results

I had this issue last year with mine. The main cause was loose clamps on charge hose to turbo. Tightened all clamps and that solved it. At same time also had mechanic install NorLok washers on turbo bolts as he heard they have a tendency to loosen. Have over thousand miles since and no codes...

My mechanic said after running g for a real short time the code cleared on its own once repaired.

The SD 26 code is "Air intake sensor"...most were intake tube clamps were loose from factory but also the turbo bolts are backing off as well causing the same, as mentioned above. Unfortunate to dump this kind of cash for a new sled and have an issue but at least at this point is a somewhat easy...

Mine did same last weekend. Dealer called it as "Intake Sensor Code". Reading forums here found others with similar and that intake tubes were loose, so should be easy fix. Another item to watch that I also just learned on another TY forum was that the 2 bolts on the turbo seem to be...

I have one I took off my SW..XTX SE. If interested you may email me john@knappconcrete.com.