Search results

Tiny call me on my cell 905351 2103 if need be

They both do the same thing with your PC plugged in select one or the other and go from there. How much boost are you running?

Hi Tiny Get onto power commander website for setting up your tunes. You’ll notice they either set up based on pressure or throttle position. It’s definitely a learning curve for you based on your set up Having autotune is a major bonus. What seems to be the issue?

Good morning earthling I’ve received a service manual but unable to read the print. Are you familiar with what accessories run off the main 30 amp fuse and the 15 amp ignition fuse ?

We’ve tested disassembled reassembled changed meters both being Fluke brands and continue to search for the illusive electrical issue. Its intermittent and presently the sled is running fine but has left me stranded last two outings. Battery connection are tight.

Looking for a service manual with electrical diagram on a 2019 sidewinder Ltd-le

Yes hopefully see a draw

Yes

I’ve removed all the harness up to the handlebars with no visible signs of damage

Yes to see if there’s a draw

Yes reverse works I’m stumped lol. What start it off as blowing my main fuse 30 amp from there found a voltage regulator had issues change that out replace the 30 amp fuse and I was good. Next outing 10 minutes into the ride it blew the ignition fuse 15 apmp blew the spare as soon as I put it...

Thanks guys for all the help as I continue to diagnose this issue, the metre I’m using is a fluke 179 and I’m getting .3 value the shop has an interior temperature of under 60

2019 Winder ltx-le blew main fuse while out riding lost power on everything. Reinstalled a new 30 amp fuse and reassembled Sled turn the key on and within two seconds blew that one as well. After running a few diagnostic tests the voltage regulator was found to be faulty changed it and...

Get into diagnostic mode Test injectors, and plugs and so much more Disconnect your external fuel pump prior to commencing

Drivers side shock location has a see through view of the fluid level and indicator mark

Get in touch with Dave @ hurricanedave@hotmail.ca he’s got everything you need to re-calibrate your clutch

Ateick This is my latest map with trims not excepted yet let me know if you can upload this luc MAP table 09 nytro xtx 430 injectors with external MSD fuel pump no head shim or head studs plug gap .018 power commander & auto tune 6 lb boost @ 8600 rpm 91 octane with 4 oz of torco accelerator...

Hey Ateick I’ve got just your setup and I’d consider a map based of 13 columns being your running 6lb boost and start @ -6,-5,-4,-3,-2,-1,0,+1,+2,+3,+4,+5,+6. Then you can set your afr based of boost pressure. I’ll up load my recent map that has auto tune enhancements for your convenience and a...

Hey Ateick There’s a great video on power commanders site with regards to this topic. I’ve based my program of pressure n never looked back Also you’ll need to cancel out your tps table and create your pressure base one. A few questions Stock injectors or what size ? Fuel pump original or...