Search results

Hello, yes it's fixed, it was the regulator/rectifier. Everything work like it should now. Thanks everyone !

Look’s like it’s the culprit. Here are my reading with my multimeter : Positive side : 1-517, 2-0, 3-516 Negative side : 1-144, 2-144, 3-144 I don’t know what are the units of these number, but clearly the second value on the positive side is zero, there is my problem I believe !

Hello everyone, Did some testing again today. Here is what I found : I've unplugged the connector that goes from the stator to the voltage regulator and the Amp dropped from 30mA to 25.7mA. After that, i've unplugged the bottom black connector from the voltage regulator and the draw completely...

Yes it’s sad. It’s sad because I love this snowmobile and electrical issues are the most annoying thing IMO.

That’s an option I was looking for but never tried. Should work no problem IMO

I’ve tried 2 brand new Yuasa OEM batteries and they both does the same thing.

I can confirm that even if main harness for cluster is disconnected, still drain the battery. It’s something else that I can’t find out at the moment. I’ll keep you informed.

Hi, the ECU as been flashed with Turbo Dynamics tune at the dealer when I bought the sled new in 2018. Never had an issue with that. This mysterious draw started this year. Today I’ve disconnected almost every sensors/connectors to see if they were faulty, still not found my 30mA draw. Also...

Hello, it’s a good point but the draw is still present while there is no key and the killswitch at off. Still trying to find it out !

Thanks everyone, really appreciated !

Beside it’s tuned since new, nothing was added recently. It’s started to do this this years when I’ve get it out if the storage !

Hello, here an update : Removed all fuses and relay once by once. The only one that make it goes to 0mA is when i’ve removed the green 30A fuse for the battery circuit. What does it mean ?

So 30mA is too much ? Should It be 0mA normally ?

Hello, Just bough a new OEM battery for my 2018 MTX Sidewinder. The new battery is already dead 3 weeks later ! Did testing to see if there is a parasitic draw on my snowmobile. When key OFF and snowmobile not running, I have 30mA draw with the multimeter plugged in series on the negative side...

Thanks for the reply ! :)

Hello, What is the purpose of this tank beside bleeding the cooling system or coolant expansion ? Did someone removed it ? Does it affect cooling ? I know manufacturer dont put device for nothing but, I would need that space for something else and was wondering if someone already done the...

Actually I did not notice anything, i’ll give you news if there is something wrong with this.

Thanks for your input, honestly I don’t think I will build and sell them, but I can give you the infos if you wan’t to try your own. I drilled the bung plug with 1/2´´ bit. I’ve welded a 304 SS tube of the same diameter. I have slighly bend the tube and made the cut on the picture above. I...

Exactly, that’s what i did and it work perfectly. Very happy with this.

Here is how is made in the inside. It’s called the venturi effect, it made a lot of succion from the exhaust flow.