• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. Wobbie

    A-Arm, control arm bushing part numbers

    No, It's a '15 alright. I just wasn't looking hard enough. When you do the online lookup for the "ski" drawing you won't see the parts for the bushings in the bulkhead. That's the confusion. Basically I had failed to order the other 8 bushings. My bad. Thanks, though.
  2. Wobbie

    A-Arm, control arm bushing part numbers

    So, trying to be a little pro-active in the off season I ordered up some Yamaha bushings for my a-arms ('15 Vector). From the Yamaha parts lookup I get 90381-16N51 for the lower inner. Bought from Yamaha but they are too big. Looked up for other years and tried Apex but all of these chassis...
  3. Wobbie

    2014 Sr viper idle 4200epm

    I'll go out on a limb and suggest a vacuum leak. Not sure what sled - are there carb/throttle body boots? Check for cracks.
  4. Wobbie

    15 Vector Bar Riser

    Sorry, just had to share... Just installed PowerMadd 45419. Huge improvement. I can now stand comfortably. Better control on low speed turns (bars closer to shoulder height). Also, I had a lot of noise in my helmet (Skidoo modular 3) above 90km/h so I took 2.5 inches off the windshield.
  5. Wobbie

    12 Vector reverse problems

    I'm new here, first year with a '15 Vector. I was amazed when I bought the machine that if I put the rear of the sled on a stand and started it up the track would roll forward. And not just inching along as though there was a little drag, it wanted to go. I also noticed that it didn't like to...
  6. Wobbie

    2012 venture GT eating belts

    My inner child wanted to tell you to release the parking brake. Sorry, couldn't resist. Any luck on resolving this? My first thought was that it might be the secondary twist angle. The sheet I have (not for the '12 model year) shows the Vector at 70 degrees (Sheave at 1 and seat at 6), the...
  7. Wobbie

    NEW SETTING ON ULMER CLUTCH KIT

    So does this result in more degrees of rotation or less? What affect has it had on the behaviour of the sled?
  8. Wobbie

    2003 rx1 primary clutch, weights and rollers

    I'll go out on a limb here...you told someone that you thought your primary was toast, that someone said "to go aftermarket" they were thinking that you should get (for example) a Powerbloc PB80 instead to buying another Yamaha factory clutch. Under $600 and lots of folks seem to really like...
  9. Wobbie

    Secondary Clutch/8DN made easy

    Sorry, not intending to hijack anything here, but I am amazed at the shop manuals (both SkiDoo and Yamaha) that ignore the belt deflection - or slack if you prefer - on the clutch setup. I recently bought a '15 Vector and was shocked when I had the engine running and lifted the rear of the sled...


Back
Top