• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. M

    Chaincase oil seals depth

    I'm currently in the process of changing the bearings and seals on my chaincase and cannot recall how deep the seals sat. I completely forgot to pay attention to the depth that the original ones were sitting since I just assumed that they bottomed out against a lip of some sort. Would anyone...
  2. M

    I made spacers for my rollerski (C&A MTX Ski)

    Just though I'd post my solution to being able to install my rollerski's to my setup. I got myself a set of 8" C&A MTX ski's and couldn't attach my rollerski's without making a spacer. I ended up buying a block of 1-1/2 thick solid plastic and used my jigsaw and angle grinder to shape my...
  3. M

    17V reading at passenger hand warmer connector

    Hello everyone, As the typical Venture owner, my passenger hand warmers weren't working over the last two seasons that I've owned the sled. I found the issue being at the switch so I ordered a new one. I tested the connector before connecting the switch to see if power was getting to the unit...
  4. M

    I need to be schooled on passenger handwarmer wiring

    Hello, As i'm reaching to tail end of putting my Venture GT back together, I decided to tackle my passenger hand warmers that haven't worked since owning the sled. First I thought that the handwarmers themselves weren't working so I tried peeling back the rubbber boot off of them, i tried...
  5. M

    Rollerski for 8" C&A Pro MTX Ski

    Hello everyone, I went to install my old Rollerski onto my new skis and they cannot retract due to my wider ski. I hadn't thought of that when ordering my skis and now hoping I can figure something out. I wrote to Qualipieces since they have a rollerski for the Arctic Cat Bear Cat 8 inch ski...
  6. M

    On the quest for better steering/handling - RS Venture

    Hello everyone, I've been slowly acquiring some parts to help fix my loose steering as well as improving the durability of the components used. As we all know, the steering pivot arms have a weak point as to where the plastic bushings wear out and cause sloppy steering. There's also the...
  7. M

    Track adjuster flange nut thread pitch and size?

    Hello everyone, I went for a good ride yesterday and would get a loud thump if I went 7K or more RPM's, sounded like the track was missing the cogs or something similar so I took it back home. When I got home I noticed that the track was quite loose and then saw that the adjustment nut on the...
  8. M

    Shredded a belt today

    I was out riding during lunch time and went onto an in land lake which had some pretty deep snow. I could feel the belt slipping as I wasn't able to accelerate very quickly, revs went up but I wasn't moving any quicker. Do venture's typically not perform very well in deep snow? I took a couple...
  9. M

    09 RS Venture GTYR Adjustment knob

    Hello everyone, Would anyone happen to know where I could get an adjustment knob for my front shock? It's the knob that controls the damping compression force sitting on the resi, mine is rounded out and cannot seem to locate one anywhere. Thanks
  10. M

    Got to test ride my Venture after all the work I've put in

    Hello everyone, Well as the title states, I was able to finally test out my Venture on December 27th before it melted away in the following days. We still don't have enough snow where my cottage is, located in southern Quebec; which is quite depressing. I believe we're getting snow this week...
  11. M

    Has anyone changed their center shock?

    I was wondering if anyone has swapped out the center shock on their RS? As I'm putting my sled back together I was checking to adjust my center shock but I'm not certain I have the correct one. As per the owner's manual, it states that the measurement from the adjustment nut to the center of the...
  12. M

    Another bent pivot arm bracket/shaft

    Hello Everyone, Over the weekend I was installing my new Pivot arm in hopes to having my track all back up and in place for the upcoming season but then came across another bent pivot bracket and shaft. This pivot bracket holds the first set of center wheels at the front of the skid. My...
  13. M

    09 Venture GT Pivot Arm issue

    Hello everyone, I'm new to this thread but have been active on snowmobile fanatic. I purchased a 09 RS Venture GT last season and got to ride it quite a bit which was a blast and nothing really seemed wrong with the machine at the time. I started digging into the sled this summer for a...


Back
Top