Search results

I know where there's one, but you really have to want it.

Shark, I did the same thing, pulled the track down with a 20lbs anchor and gave it one inch of clearance. I can't wait to get to Cable and see if things are better! This sled has been a pooch since day one and I may have caused it to be that way with the poor choice of studs and there...

87gtNOS Thank you for all the info ;)! ;)! ;)! So in laymens terms and the new Snapple tv add, this is the GOOD STUFF? You can't go wrong using it at any time or any quanity within reason? I agree, I take it with me on trips sleding and dump a half a can in before we leave the cabin...

Thank you all ;)! I will pull her girdle up a little tighter, it does make sense I am running Pioneers extra wheels in back so it's not like I'm rubbing the hyfax to death and you know what the best part of it all is? I have tools :tg: There's something to be said about a simple life...

Thanks Shark, That's what I thought, I grabbed a 20lbs anchor and with the sled in a forklift hooked the anchor in the middle and measured 2" of drop. I only have 75 miles on this new track so I will wait for it to come to me as it will stretch out some more. I will admit I have seen 3...

Hey All, I just changed out my ripsaw (failed) for a Cobra, 1.352" and wondered how loose I can run this? I have no studs and in the old days the looser you could run them without climbing the drive cogs = more MPH, does that hold true today? Please advise and thank you in advance. Mark

I wondered how long it would take for youz guyz to see I had altered the product, christ I hope I don't get sued. I was not aware that you could use to much, thank you for that info. This special Sea Foam can be purchased directly from the world wide distributer (me) for a minimal price...

I had one of my 130mm (5 1/8") wheels loose half the rubber so I went to order another. NOT at $80.00 a pop, I went with 2005 RX-1 plastic wheels at half the price. Also they have a new wheel this year for $23.00 that will replace all rail wheels but yo need to knock off the sharp edges of...

Well, Just went out and grabbed a can off the shelf, made in Eden Praire MN since 1942, sold on the basis of your moneys worth or your money back, HUM don't hear that much anymore. Contains pet. dist. (CAS 64742-49-0) pet. oil (CAS64742-54-7) 2-Propanol CAS (67-63-0). Use in 2 or 4 cycle...

I don't know what makes it so great, it's like WD-40 for your engine. I have been collecting older MG's and I add it to the crankcase, in the gas and if it's a bad one drop it down the carb straight, shut the motor off and let it sit 20 minutes, fire it back up and watch the tailpipe, yaouza...

It's time for the secret wepon! :jump: :jump: :jump:

HAPPY DAYS ARE HERE AGAIN, IT'S NICE TO BE WARM AGAIN!!! Hats off to you Rock (I mean gloves :jump: ) what an improvement. To sit in the driveway and let other get there hands warm on your bars at idle, WOW. Didn't even bother me that I got my AZZ kicked on the lake because my hands were...

2800 miles and mine is junk, four broken bars and 8 pull throughs. I will replace with same because I now know why it failed. I put 144 down the middle but used angle aluminum backers and a pretty tall stud so I guess I asked for what I got. O this track is on a 06 Apex GT. :o|

Mark 06 Apex GT Even had the hood painted in flames, still cold, very cold. had update done at Hauck and further work done at Pat's. Won't melt an ice cube :o|

Can you tell me how to pay by pay-pal :o|

Spent week of Jan 19-26 in Hayward, cold I mean cold I've had both updates, one at Hauck one at Pat's they still suck. Tow nites got back to cabin and ran hot water over hands to get feeling back, I mean really come on it can start itself shut itself off and yet the handlebars came right out of...

We are going to Hayward Wi this weekend also, haven't been able to go for the last three years for lack of snow and we are leaving our options open for Hurley, Eagle River (even with big race weekend) Watersmeet and the U.P. 1500 miles on a two year old sled :o| should be good on trade-in...

Thanks for the help, should I change the filter also? Happy Holidays all!!! :4STroke: :rocks:

Had a friend talk with Bruce Schrader and someone else said Mobile 1 bad news. :o| They claim it's too fine and can cause premature seal failure and voids warranty, is this true? :4STroke: :rocks:

Captain high miles here; Goin to change oil before the season starts and had first service done at 500 now have 1500 and want to know if I should stay with Yami or how bout Mobile 1? Your thoughts, thanks. :4STroke: