Search results

Just wondering what's everyone's opinion on Floe trailers. I have 2 136" apex's and a 144" phazer. Just wondering if I'd be able to get them into 16' floe protektor trailer. It's about a thousand more for a 22' 4 place protektor. How do they pull? Problems?

I just picked up a 2007 phazer for my daughter and I was checking it over I noticed on the primary that the flyweights aren't even sitting on the rollers. I've never seen it like that before. Any ideas? Stock clutching

So I installed my yamaheater on my apex and I can't get the red light to turn off. I know the function has changed with the motec as only up works and you just keep pushing up to turn it off. I've already talked to Rockmeister and his product is working correctly. We figured out that the...

I'm replacing some aged original fuel and is wondering if any one new the exact size? from fuel pump to fuel rail. Thanks

I just bought an apex off a friend. I can't seem to get warm idle above 1,100 rpm. I did notice he had the atmospheric pressure sensor tied into corner of blowoff valve. That would be ok if we were above 5,000 feet but were sea level. This is the sensor down in front of the left side of the...

This thread is not intended to bash any dealers or suppliers!!!!!! With all the failures lately just trying to figure When they were purchased and Where they were purchased. Maybe this will maybe give Matt some ammunition to go back to Rotrex with. I'll start Purchased in May from dealer in...

I'm buying a buddies rear mount apex that we built back in 2008. Just wondering if anyone still has manual for this. Went to the site and they have newer one but it's different. Also was wondering if I should upgrade to latest generation box as this one is old.

Anyone have the shaft break on one? 300 miles on this one and the impeller seized and sent shavings into the engine. Waiting for the head to be taken off at GNS to what damage was done. I know it didn't run without oil as I did to exact directions. Started for a minute and made sure oil was...

Just wondering this. Can't seem to get it any higher than this. Pulled timing, Pulled fuel, Pulled injection timing. New plugs.

I fixed an exhaust leak about 6 inches from my o2 sensor and now it's reading 10.5 and idle. My question is if I set the fuel trims up before with this exhaust leak and set it up for 12.5 at idle and then now fixed the exhaust leak and it's reading 10.5. Would that cause it to read rich now?

Please include or install a Fuel Pressure gauge with your kit. Their only $40 to $50 dollars extra. This will help with us diagnosing your problems. A stuck or sticking fuel pressure regulator will cause all kinds of running, idling, AFR and 0 to 1/4 throttle response gremlins. The stock ones...

I think I want to add one but have my drain for my turbo go into it. Just not sure if the turbo would drain into it as it's gravity fed. Any thoughts? It's currently feeding into the side of the case.

I have a buddy looking for a used Phazer turbo or supercharger kit. Let me know what you got. Thanks.

Trying to find and cant find. Can't nobody makes one. What the difference between older nytro and apex tunnel? The 2007 tunnel looks almost alike. Has anybody came up with anything? Since the tunnel ext. won't fit in trailer.

I should have it mid next week. I'll post some pictures of the install and reviews. So far Martin has been awesome. Answering all my emails and questions even on the weekends. I went with the M400, 1000cc injectors, unlimited data logging, boost control, anti-lag, traction control. Yes it was...

Powercommander 5 with boost for apex boost controller launch master yamaheater Check them out. Priced to sell

My msd pump locked up today and I had to go buy a new pump today but now when high boost comes on engine back fires and cuts out. Just wondering if pump I bought today is insufficient? Msd pump is rated for 43 gph at 40 P.S.I. and the pump I replaced it with is 45 to 65 P.S.I. at 35 gph. Just...

I'm doing under tunnel exhaust and impulse fuel tank just wondering what thickness aluminum did you guys use to cover tunnel after removing the hump in the center.

I posted mine for sale in classifieds. http://www.ty4stroke.com/viewtopic.php?t=117693 For Apex. Fits stock plastics, no modifying. I have the modified stock seat that will fit it also. Take a look.

Just wondering the fuel filter in the tank for a turbo sled has to be a high pressure filter?