Search results

Hey riders parting out my MTX in the classifieds link below. I will remain on the site great folks and still have tons of info to share through my Phazer expierence thanks again Rob. http://www.ty4stroke.com/viewtopic.php?t=128492

Howdy riders well the official R&D testing of my 07 MTX is official the connecting rod let loose on the inside cylinder and popped through crankcase. It has 8,747 miles on stock motor with just a pipe and air intake mod. I have to say I'm disappointed with the reliabilty and loss of rest of the...

Hey guys have noticed that the SRV Viper Chassis is not much different from the Phazer chassis really. The overall tunnel and front subframe angle is very similar to the lets call it what it is the Arctic Cat chassis. Yes the a-arm mounting point degree and shock is differnet on the SRV chassis...

I have an 07 MTX and had a huge issue with reverse when sled was new. Yamaha fixed it after much hair pulling and race team info. It wound up being throrttle positioning sensor not allowing it to shift into reverse. Well it started acting up again it would work sometimes and then it would not...

Here is a video below to show an easy removal and installion of the starter on your Phazer. The main thing is to modify the tab off the bottom motor case with a grinder. Then the removal and install will be like in the video. Some say they can get it out without any disassembly of the front...

A 2lb boost would be perfect and what most folks are looking for in the HP department. The general rule is 10 HP per 1lb of boost so is 20 HP available. I have started the process of the project so let the comments fly. The secret is what I will use for the boost producer and it's turbo like.

Hey riders here it is my complete exhaust system White Lightning Coated by Swain Tech. Product looks great with awsome workmanship and exactly what I requested. The total with coating and shipping both ways was $220.00 with 2 week turn around. The coating is only available in white but is...

To get started the motor in my Phazer MTX is completely stock. Alot of times people want to start with motor mods for more HP to improve performance. This alot of times will mask defficiencies in the drive line area. I beleive in first working with getting the performance out of the clutching...

Now that I have done quite a few mods on the MTX here are some of the 52 pound diet numbers below. Below is a list of a 10 percent weight loss program with the MTX being 510 pounds on the dry weight scale. Both tunnel holes covered priceless and a undetermined amount of weight under the tunnel...

Well the stock Phazer secondary took a crap and I was not gone to be limited to fixing that pathedic vintage thing. So the brain child went to work on a fix with some adjustability options and found it pretty easy. My dealer gave me a new style secondary clutch to borrow from the 2010-11 models...

Riding the 07 Phazer MTX today and surpassed the 6000 mile mark. Stopped and talked to another Phazer owner and found I have had good fortunes with my sled as far as issues. Riding home heard a strange noise coming from the top of the motor area figured I better check it out. Put the sled on the...

Riding the 07 Phazer MTX today 3/12/11 and surpassed the 6000 mile mark. Stopped and talked to another Phazer owner and found I have had good fortunes with my sled as far as issues. Riding home heard a strange noise coming from the top of the motor area figured I better check it out. Put the...

Just to get started I have an 2007 Mountain Lite - MTX and ride off trail and deep powder. My weight which is also a factor in doing this project is a huge factor 285 lbs. with clothes and gear. I will be looking to increase track speed which does translate into top end. The motor is completely...

Anybody know who makes an aftermarket cam for the Phazers or who has installed one yet with any results.

Anybody out there install this conversion kit from this website. http://www.carbonsled.com/rear_suspension_yamaha.htm

What is the opinion out there on the Ulmers Stealth Air Box Mod and any noticeable improvements with Exhaust or other mods.

I have a Mountain Lite with the ski stance at 39" with sway bar off and run Fox Float 2 shocks at 80 PSI. I came up with a thought to lower the front end 2" to lower the center of gravity to cure the tippy problem all Phazers have. I made a temporary bracket to bolt the shock above the factory...

Hey Nytro riders I have observed my spindle or steering knuckle ovaling where split bushings and shaft bolt ski to the spindle. Check this link out in Phazer General Talk for the Nytro spindles are the same and feel free to PM me with any questions thanks...

Well fellow riders the time has come where the show must come to an end I'm no longer gone to be making this kit. It's been a great ride and appreciate all the support of the product that's what makes this FORUM GREAT so Bush Ride On. Hey there riders of the Phazer & Nytro Chassis with the...

Anybody out there put a Power Claw Track 2.25" on there Mtx and what are your thoughts.