Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.
I installed the 2016 a arms on my 14 viper for the 36" stance. The left side tie rod hits the lower a arm under full turn. Anyone with a 2016 seeing the same thing?
Started up the sled the other day and when I came back outside I found that it had dropped all of its oil onto the trailer. Further inspection found that the factory CV boot style clamp had backed off resulting in the separation of the silicone hose and the aluminum tubing. This is not a clamp...
Anyone that owns an early model 190 kit should know this. The early kits did not request that the barometric sensor be connected to the intake. With out this your machine could be running extremely lean. Also altitude compensation does not work effectively and again causes your machine to run...
Just weighed my sled tonight with 4 digital shipping scales. Sled came out to 617 lbs with everything included below.
2014 Viper XTX
162" 2.5" camo extreme track
timbersled skid with fox shocks and reservoirs
antistab kit
extra wheels near center shock
EarthX 36D battery
Full tank of fuel...
Snow is flying and the 2015 parts are not available yet. Whats the hold up?
I was looking at buying some parts for my 14 to update to the 15 and ended up having to buy arctic cat parts (which were also not available but a cat dealer was able to phone Cat and get them). So I have the mountain...
Is anyone else getting water in there oil? Every time I do an oil change the water is milky. The first time I changed the oil when naturally aspirated i pulled bung and you could 3 count the water coming out before oil. Today did another oil change and engine was still milky but not near as...
Riding yesterday and my left hand warmer quite working. It was the hot one too. My Right hand is only marginally warm. Anyone know what to check to get the warmers working again?
My MCX kit is not compensating for elevation. Any thoughts?
It's new and installed on my viper 162. Lower elevations it is fine but at 6000 feet plus I only get 7200 rpm tops.
I have a MCX 190 turbo on my Viper MTX 162.
I was just in Togwotee and my RPM never went over 7200 rpm. I thought my clutching was off since it was my first ride to test this machine out. I get home to 1000 feet elevation and i have all my rpm that i should. RPM is hitting 8700. I do get...
Anyone have some good clutching setups running a 190 turbo and a mountain track?
I am running 8bu weights right now with slugs in both holes. It only revs to 7100 rpm.
Does this nipple need plugged? Nothing in instructions about it. Not sure what it is for.
Installing right now.
OK can't upload pic from phone. It is the nipple on backside of turbo control valve. It controls boost pressure for elevation. Two nipple are used and the other is not. Guessing...
Was able to get a few miles on the sled yesterday. Conditions are still weak but some of my atv trails are covered and ditches are blowing in with some drifts.
This Viper is the first Yamaha sled I have drove that I would feel completely comfortable letting my wife drive. It is very stable...
Picked up a Earth X Battery 36D here in Manitoba from a local dealer. Wanted to shed some pounds on the right side of my sled.
Battery weighs 3.3 lbs, 680PCA and 405 CCA at -30*.
The construction is much better then the shorai and ballistic. No cells to come loose and fail. This is...
Can a 16" wide fit in the Nytro se tunnel? To fit a 3" paddle do I have to do the front HX mod from CR racing or just smaller driver, both?
Having a heck of a time with trenching when parked. Everyone else takes off no probs but I just blow teh snow right out from under me. Once I am going...
Any inputs on this area? I know nothing of the area. I don't want to trail it as we want to do some boondocking. I have some newbs with me that want to learn how to ride the powder. Any inputs? All guides are booked.
Also where is a good place to stage? Staying in Jackson.
Will be riding Togwotee on 31st. Fist time. Anyone have some pointers where to unload. Good trail to get to some good off trail? Will have some newbs with me and they want to learn how to ride some pow.
Any suggestions?
Anyone cut off the foot loops on the skinz airframes? Did it cause any damage to outside support?
My feet are big with boots and do not fit in the stirrups very well without putting strain on my hips (bad hips from being a goalie). I love the airframes for function but dont like how they...
Anyone else find it harder to pull nytros over on there left side? Or is it just me? Only riding in about a foot of snow so it is more difficult. Don't have as much trouble when in deeper snow. Is it because there is more weight on right side?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.