cnybrian
Lifetime Member
- Joined
- Oct 6, 2011
- Messages
- 476
- Reaction score
- 159
- Points
- 928
- Location
- Cato, NY
- Country
- USA
- Snowmobile
- 2006 Yamaha Attak
- LOCATION
- Cato, NY
Got a 2006 Attak and had the shocks rebuilt by Pioneer Performance. I have a fat boy spring I picked up too.
As you can see, mine is set 3rd from the top.
Where is everyone running the rear shock in terms of spring load?
What is best way to remove the clip if they need to be adjusted?
Thanks
Brian
As you can see, mine is set 3rd from the top.
Where is everyone running the rear shock in terms of spring load?
What is best way to remove the clip if they need to be adjusted?
Thanks
Brian
TBay Sledhead
TY 4 Stroke Master
- Joined
- Jan 16, 2005
- Messages
- 1,129
- Reaction score
- 39
- Points
- 1,088
- Location
- Thunder Bay, Ontario.Ca
- Country
- Canada
- Snowmobile
- 06 Attak
01 SXR Long Track
I set mine on bottom ring and adjuster on hi. get a cheap spring compressor. I made a spring compressor for when the shock is out.
I have my 6.5kg spring set in the middle groove. I'm about 200lbs geared up.
With the spring off (as in the pic posted) its easily done with a flat screwdriver.
If adjusting while in the sled then do as TBay suggested and get a cheap spring compressor.
With the spring off (as in the pic posted) its easily done with a flat screwdriver.
If adjusting while in the sled then do as TBay suggested and get a cheap spring compressor.
