Vmax4
TY 4 Stroke Guru
- Joined
- Apr 18, 2003
- Messages
- 793
- Reaction score
- 0
- Points
- 741
- Location
- Orondo, WA
- Country
- USA
- Snowmobile
- 2010 FXNytro MTX 162 SE with a 270 hp MCX Turbo and assorted goodies!
Was wondering, does the 04' RX1 have the same tunnel and heat exchanger protectors as my 03'? It seems a bit tight, and I noticed way more track noise and a bit more vibration after changing my stock 121" track to a Rip Saw 121" 1.25" track. Just wondering if anyone has noticed the same, and if the protectors are all the same.
Thanks,
Steve Burdick
Thanks,
Steve Burdick
LazyBastard
TY 4 Stroke God
- Joined
- Apr 13, 2003
- Messages
- 5,276
- Reaction score
- 5
- Points
- 1,216
Protectors are all the same. If you have any more noise, you probably bent a heat exchanger slightly, allowing it to resonate. I've got a nasty vibration out of my front left heat shield.
POWERHAULIC
VIP Member
Ripsaw's are noisier than finger or 6-pitch tracks, they will make a resonating hum.
Vmax4
TY 4 Stroke Guru
- Joined
- Apr 18, 2003
- Messages
- 793
- Reaction score
- 0
- Points
- 741
- Location
- Orondo, WA
- Country
- USA
- Snowmobile
- 2010 FXNytro MTX 162 SE with a 270 hp MCX Turbo and assorted goodies!
03' tunnel and heat exchangers same as 04'
Is there a diameter size change on the 04', or is it exactly the same???
Is there a diameter size change on the 04', or is it exactly the same???
