2.86 drivers on 2008 nytro?

[scottleroynichols]

I just bought the 2.86 drivers to fit my 2008 nytro from my dealer but there's a bit of slop between the driver and the hex shaft. Is this ok or do I have the wrong drivers/shaft? The old drivers were super tight, I don't know what to do, any help?

Scott

 

[Big_Phil]

I dont think you have the right drivers. They should be very tight, you have to press them on and press them off.

 

[scottleroynichols]

That's what I was thinking. The drivers are from a 2014 nytro and the shaft is from a 2008. I'm thinking there's a slight difference in the hex diameter.

 

[scottleroynichols]

What should be the distance between the drivers once they are on the new shaft and how can I be sure they are centered on the press before I mount the shaft in the tunnel?

 

[philip]

Should be 1 shaft on 08 and 2012 is 1 1/16 driver

Sent from my SM-G920W8 using Tapatalk