BlazingCanadian
Newbie
- Joined
- Feb 25, 2017
- Messages
- 10
- Reaction score
- 0
- Points
- 61
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2016 Phazer XTX
Hi there I was hoping some one may be able to shine some light on this for me, I have a bone stock 2016 XTX with just under 1100km on it. Just before 1000km had all the post break in maintenance done, also had the track tightened as it was a little sloppy.
Once I got out on the sled I noticed the clutch is engaging slightly higher than before close to 4000 rpm and engaging quite rough, it's no longer a smooth take off. The sled then jumps immediately once I get going, roughly 7200 rpm around 30 km/h then close to 10k around 50-60 km/h. When I get up to higher speeds 75+ the rpms seem to even out a little. Slowing down it also seems a bit jerky.
I am wondering if this is normal before 1000km I don't remember the sled driving like this, also I burned through a pile more gas as it seemed the engine was working much harder than it had to.
Any insight would be great, thank you I'm advance.
Once I got out on the sled I noticed the clutch is engaging slightly higher than before close to 4000 rpm and engaging quite rough, it's no longer a smooth take off. The sled then jumps immediately once I get going, roughly 7200 rpm around 30 km/h then close to 10k around 50-60 km/h. When I get up to higher speeds 75+ the rpms seem to even out a little. Slowing down it also seems a bit jerky.
I am wondering if this is normal before 1000km I don't remember the sled driving like this, also I burned through a pile more gas as it seemed the engine was working much harder than it had to.
Any insight would be great, thank you I'm advance.