Autotune AFR map setup for Hindle/Hurricane setup ???

kojack

Pro
Joined
Dec 24, 2011
Messages
173
Reaction score
5
Points
698
Location
Fredericton, NB
Country
Canada
Snowmobile
2014 Yamaha Viper XTX MCX
LOCATION
Hanwell
Anyone with a good or perfected AFR Map they would like to share? I'm a newbe when it comes to AFR stuff and would like to get a good baseline and just fine tuned from there. The AFR map is currently all at 0.

Setup is 2009 Nytro XTX. Hurricane Power Kit. I have the PC5 and Dave's map. AutoTune and LCD. Have a good map but would like to find something. I called Dave at Hurricane but didn't have anything on hand as he was away from the office. I've sent Allen Ulmer an email also if he has anything.

Txs for the help guys

Dan
 
kojack said:
Anyone with a good or perfected AFR Map they would like to share? I'm a newbe when it comes to AFR stuff and would like to get a good baseline and just fine tuned from there. The AFR map is currently all at 0.

Setup is 2009 Nytro XTX. Hurricane Power Kit. I have the PC5 and Dave's map. AutoTune and LCD. Have a good map but would like to find something. I called Dave at Hurricane but didn't have anything on hand as he was away from the office. I've sent Allen Ulmer an email also if he has anything.

Txs for the help guys

Dan

Hey Dan,

I'm confused. It says you have Dave's map but all your values are at 0?? Have you just not installed it? If you have Dave's map the autotune should take care of the fine tuning.
 
You need to install the a/f values for the autotune work. 0 means it's trimming 0, needs a target a/f to work toward. Pm me with your email and I can send you a a/f table.
 
Yes I have Dave's map in the PC5. But the Trim Tables and AFR Tables are all at zero. So the auto tune is not tuning as he's only seing "0" everywhere. I need a Tuned AFR map would be wicked but if a good base map is all I can get well I'll build from there. Would be nice to have one setup as the season is getting shorter and shorter over here and lovely rain forecast for the whole day. Guess it'll be a wet tuning day :) Beats any day at the office.
 
The pc5 map and a/f table are two separate things, the autotune will not work by itself just running the pc5 map with no a/f values.
 
sorenson1610 said:
The pc5 map and a/f table are two separate things, the autotune will not work by itself just running the pc5 map with no a/f values.

What he says

I was fortunate enough to get a AFR map from a fellow TY'er. That's what I like about this site. You ask, You get an answer. Well most of the time :)
 
Does anyone know how lean we can run our sleds? I've seen mapping from 12.5 up to 13.8 in the AFR table. If we only run fuel suggested by the manufacturer at 89 what would be a safe range? Any idea? Don't wanna her run too lean and cause' problem down the road. If she makes it up to the road. :)
 
I believe mine runs 13.3 in the very upper rpm range
 


Back
Top