Bent something up front... Tekvest works!

[2008 Nytro RTX]

There were a few times I thought I bent something in the front end this past weekend.Jumping about 5ft in the air came down with all the weight on the left side of the suspension threw me off,Nothing bent. So far so good and I am loving it!

 

[Philscbx]

Got it partially bent back. The skis are at least parallel and not dog walking. The camber is way off and the castor is still bent back. One thing I notice though is that with the camber the way it is, the machine turns on a dime. Is it possible to change or adjust the camber on these things?

I would do like I did and remove all the A arms and lay them on a flat surface and see if the bolts pass through the ends squarely.

If not, a hyd press can be used to tweak them back little by little.

Get the A arms square to the world, then see what's next in line.

Hopefully your not just using a 6 foot crow bar.

 

[loudelectronics]

No I just took a tow strap and wrapped it around the spindle and arm. Tied the other end to a tree and full throttle in reverse. Realigned everything, now the spindle is the only thing out of wack.