Boss Nos bottle position

[TnT Motorsports]

Hi Guys!!, first post here. Have been watching the site for a long time learning. Bought a 2003 RX1 with lots of mods this summer (Thanks Greenmachine), and purchased a Boss Nos kit for it (40hp). Lots of expierience moding 2 strokes, not much with 4's or NOS.

Was wondering if there were any conclusions drawn since last year with the placement of the bottle and the best location for it. (Nozzle up/down, back/forward)? Where is the best location you have found for the bottle?

 

[yamahajunkie]

hey tnt welcome. i have the boss noss kit too
i modified the tool kit/storage spot for a bottle. try to get it as flat a possible. acceleration will draw the noss out.

now i have 2 bottles mounted to the bracket for steering stem.
sorry no pics of this, it up north.

i do have a couple of the bottle up front though. junkie

 

[AIRWOLF]

now i have 2 bottles mounted to the bracket for steering stem.

I would like to see a pic of that, as soon as you can get one please

 

[yamahajunkie]

might go up this weekend if theres snow, i'll keep you posted.

 

[TnT Motorsports]

Thanks for your welcome and input yamahajunkie, would also like to see this mount. Is there any surging with the bottle valve up?, can you completely empty the bottle this way?

 

[yamahajunkie]

first bottle had a little left in it when i pulled it to refill. not much though. so i moved the bottle towards the motor, and put some spacers on the bottom clamp to lift the bottom of the bottle. you cant get flat totally, and clear the hood. but if your hooking up the front end is up, then the bottle flat, and your launching pass somebody. junkie

 

[Skydog]

Have fun with the Nos!!

 

[Frostbite]

Is there room for a four pound bottle in your opinion? I have a BOSS NOSS setup ordered (have for quite some time) and I'd like to use one larger bottle instead of two 2 1/2 lb. bottles.

How about mounting it horizontally above the motor?

Frosty

 

[700SCOTT]

now i have 2 bottles mounted to the bracket for steering stem.

I would like to see a pic of that, as soon as you can get one please

could you post or pm me a pic. of how you fit two bottles on the steering stem? i just have a single and you have to position it just right for the hood to close right.

 

[yamahajunkie]

might go up this weekend if theres snow, i'll keep you posted.

=

 

[NOS-PRO]

now i have 2 bottles mounted to the bracket for steering stem.

I would like to see a pic of that, as soon as you can get one please

could you post or pm me a pic. of how you fit two bottles on the steering stem? i just have a single and you have to position it just right for the hood to close right.

I bet it is possible, but still would like to see that.

I think they make a 3.5 lbs. bottle, but have to find it.

 

[700SCOTT]

might go up this weekend if theres snow, i'll keep you posted.

=

now that i read my post i kinda sounded like a prick and i only ask because i want to run more if i can do it easily.

 

[rxwhopper]

like to get more info on this,