C+A Razors??

[raginyamaha]

I had C+A razors on my rage and liked them a lot, ne one have nething bad to say about the on an rtx?? wondering if i should spend the 300 or so bucks again.

 

[Snowman07]

I have them on my Nytro. They handle good in my opinion. Sucks to turn them from a stop, but they handle great at faster speeds. Your gonna hear alot of opinions on the ski issue

 

[jedwards89]

go with Curves

 

[2008 Nytro RTX]

I also have them on my sled,The white skis and black loops look awesome and the skis take the darting away 100%. I did not find the Razors hard to turn,But have not ridden on them in hard packed snow. This should change this weekend.

 

[sleddingfarmer]

I have 600 miles on my 09 SE with the razors and I love them. So much better than stock, I have no complaints. I totally recommend them.

 

[Kraze3]

I have the C&A Pro Razors with 6" shapers and they are extremely aggressive. This has to do in part with suspension setup. Still trying to dial it in. From idle they are really tough to turn. On the trail right now they are darty.

 

[2008 Nytro RTX]

Finally road them on hard packed this weekend,Going slow they are a fucking bitch too turn. Go fast and they turn light!

 

[NOS-PRO]

C&A Razors on mine and let Master of Faster take it for a rip this past weekend. Nytro feels glued to the trail.

No complaints here and the stock skis suck.

 

[northerndoc]

I have Slydog Powderhounds (w/ 6" Shapers) and personally love them (on trail and off), but after riding my buddy's RX1 with the Curves this weekend, I think that's the way I would have to go if I was doing it over. Best of both worlds- great handling on the trail w/ no darting and super easy to steer even under a "1-ton". Also have decent width, so they work pretty well off trail.

 

[Unluckydiablo]

Went with slydog trail ski, with 7.5" shapers, and man, the whole sled is different. No darting, no hard turning (turns MUCH easier), and floats better. Best money I have spent on the sled yet! As to the razors, my buddy has them on his rev and he talks about them being hard to turn at slow speeds. I'm hopeing to switch skis with him some day and see how we each like the others.

 

[lucky_7]

I have a set of 7.5 inch shaper bars that I am looking to get rid of that fit C&A skis. I bought them to try with my curves, but after 40 miles I figured out it was way too much carbide.

Will throw you a good deal, let me know if anyone is interested.