Ekvin
Newbie
- Joined
- Mar 29, 2014
- Messages
- 2
- Reaction score
- 0
- Points
- 241
Sled fired up and idled fine to warm up then ran great for 4 kms then shut down. Rechecked all fluids and everything was good but noticed the oil tank was very hot to the touch and the cylinder head was hot to touch but oddly the oil itself was not hot just warm. Fired it back up and drove slowly watching for warning lights/codes, flashed 35 and shut down again. Walked back to the truck and loaded up the sled to bring home.
What exactly is the code 35 and it cause? The hot oil tank was concerning, likely caused by what ever the code 35 is?
Thanks for any help, need to get pointed in the right direction to fix the issue.
Cheers,
Kevin
What exactly is the code 35 and it cause? The hot oil tank was concerning, likely caused by what ever the code 35 is?
Thanks for any help, need to get pointed in the right direction to fix the issue.
Cheers,
Kevin
Keith1962
Pro
- Joined
- Mar 26, 2015
- Messages
- 145
- Reaction score
- 35
- Points
- 753
- Location
- Camillus, NY
- Country
- USA
- Snowmobile
- 2009 Nytro XTX,OFT Relocator, Excell exhaust, Curve Skis, Excell wheels, Dupont Slides. Star Suspension. Hygear Billet rear shock and spring spacer. Air Box Mod. Clutch mods, Polished tunnel. Custom GPS mount. BOP Skid Plate. RSI handwarmers.
https://ty4stroke.com/threads/fault-codes-relay-fuse-location-wire-diagram-diagnostics.83992/
Code 35 is for the ignition coil on cyl # 3
Code 35 is for the ignition coil on cyl # 3
Ekvin
Newbie
- Joined
- Mar 29, 2014
- Messages
- 2
- Reaction score
- 0
- Points
- 241
Ok thanks, anyone happen to know what that means? Is it the coil for cylinder 3 needs replaced?


- Joined
- Jun 1, 2004
- Messages
- 7,857
- Reaction score
- 2,049
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
i would pull and test the coil 1st as it could be a connector or wiring issue for that coil.